Please note, this product is non stock. Contact our technical team for updates.
Sherwin Williams Dura-Plate 301K is a solvent free, surface and humidity tolerant two pack modified epoxy that is anti corrosive for long service life steel protection.
Sherwin Williams Dura-Plate 301K can be applied without dew point restrictions and over wet steel surfaces. 301K shows good chemical resistant, abrasion resistant and edge-retentive properties. It can be applied over steel prepared by hydro blasting, grit blasting or mechanical tooling. Dura-Plate 301K provides excellent edge retention (when used with 301S), has no dew point or relative humidity restrictions, excellent anti-corrosive properties, can be applied over wet substrates, can be applied over medium flash rust, and has excellent substrate and intercoat adhesion.
Sherwin Williams Dura-Plate 301K is an anti-corrosive coating for long service life steel protection. It can be used for both immersion and above the waterline service in marine, offshore, construction and industrial applications. It is suitable for new building, conversion, repair or maintenance applications. It provides superior performance protecting areas such as ballast tanks, void tanks, crude oil tanks, slop tanks, mud pits, wet spaces, bilges, decks, external hull and steel bridges.
Suitable for use in USDA Inspected Facilities.
Surface must be clean and in sound condition. Remove all oil, dust, grease, dirt, loose rust, and other foreign material to ensure adequate adhesion. DURA-PLATE 301K is tolerant to hydroblasted, wet or dry abrasive blasted or mechanically treated surfaces.
- Finish: Semi-gloss
- Drying Times: 14 hours at 25°C to touch, 7 days at 25°C to recoat
- Dry Film Thickness: 100 - 300 microns
- Pot Life: 3 hours at 25°C
- Theoretical Coverage: 10m2 per litre for 100 microns, 3.3m2 per litre for 300 microns
- Available in red oxide, light grey, and white
- Available in 4 and 20 Litres
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.