Sherwin Williams Firetex M95/02 Epoxy Intumescent

Sherwin Williams Firetex M95/02 Epoxy Intumescent

SKU id12880 Part A and B: UN1263 (Class: 3, Pk Grp: III)
An epoxy intumescent suitable for cellulosic fire protection for exterior blast cleaned steel.
Available in 18 Litres
£407.74 (£489.29 Inc VAT)

Product Description

Promain In Partnership With Check A Trade

Sherwin Williams Firetex M95/02 is an epoxy intumescent suitable for cellulosic fire protection for exterior blast cleaned steel.

Best Uses

Firetex M95/02 exterior durable intumescent, which can be applied directly onto blast cleaned steel. Suitable for application in-shop and on site, provided the conditions listed below are adhered to. After application, unless a sealer coat is applied prior to exposure, the coating must be protected from the weather until the material reaches a shore D hardness of 50 in order to become exterior durable. Applications below 15°C may result in insuffi cient curing and reduced weather resistance and performance. See application conditions and overcoating.

Application

Apply using airless spray or trowel for small areas or touch up only. Recommended primers: Macropoxy L574 Blast Primer, Macropoxy C425V2 Zinc Phosphate Primer, Macropoxy C400V3 Epoxy Primer/Buildcoat, Macropoxy M111 Wet Blast Primer, FIRETEX C69 Fast-Track Blast Primer. Recommended topcoats: For self overcoating, the maximum overcoat period is 7 days. Outside of this period, mechanical abrasion will be required to ensure optimum adhesion. Where a high degree of gloss is required overcoat with Acrolon C137V2 within 7 days at a minimum DFT of 50 microns or in the case of Acrolon C750V2 overcoat within 4 days. These overcoating times refer to achievement of optimum adhesion at 23°C and will vary with temperature. If applying directly to steel, blast clean to Sa2½ BS EN ISO 8501-1:2007. Average surface profile in the range 50-75 microns.

For use on I column 4 sided beams and hollow columns, FIRETEX J220 scrim cloth must be installed. For use on structural 3 sided I beam sections, FIRETEX J120 or J220 scrim cloth must be installed around the bottom flange of the beam.

Recommended Products To Use


Sherwin Williams Macropoxy C400V3 - Formerly Leighs Epigrip C400V3

Sherwin Williams Macropoxy C400V3 - Formerly Leighs Epigrip C400V3

A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.

From £64.22 (£77.06 Inc VAT)
Sherwin Williams Acrolon C750V2 Acrylic Epoxy Finish - Formerly Leighs

Sherwin Williams Acrolon C750V2 Acrylic Epoxy Finish - Formerly Leighs

Finish coat for exterior exposed surfaces where retention of gloss is required, and the use of isocyanate products is prec...

From £82.20 (£98.64 Inc VAT)
Sherwin Williams Macropoxy L574 - Formerly Leighs Metagard

Sherwin Williams Macropoxy L574 - Formerly Leighs Metagard

Used as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning

From £59.60 (£71.52 Inc VAT)
Sherwin Williams Macropoxy M111 - Formerly Leighs Eprigrip

Sherwin Williams Macropoxy M111 - Formerly Leighs Eprigrip

A 2 pack zinc phosphate epoxy wet blast primer for application to surfaces which have been prepared by wet abrasive blasting.

From £78.71 (£94.45 Inc VAT)
Sherwin Williams Firetex C69 - Formerly Leighs

Sherwin Williams Firetex C69 - Formerly Leighs

A two pack blast primer for Sherwin Williams Firetex intumescent coatings.

From £178.35 (£214.02 Inc VAT)
Sherwin Williams Macropoxy C425V2 - Formerly Leighs Epigrip

Sherwin Williams Macropoxy C425V2 - Formerly Leighs Epigrip

A high build, 2 pack epoxy, zinc phosphate primer / buildcoat for the anti corrosive protection of steel.

From £83.68 (£100.42 Inc VAT)
Sherwin Williams Firetex J120 Scrim Cloth

Sherwin Williams Firetex J120 Scrim Cloth

A high temperature jet fire resistant fabric scrim cloth designed to reinforce Firetex M90.

£1,002.00 (£1,202.40 Inc VAT)
Sherwin Williams Cleanser Thinner No 13

Sherwin Williams Cleanser Thinner No 13

A solvent based, specially formulated product to use alongside compatible Sherwin Williams products.

From £27.84 (£33.41 Inc VAT)