£7.75 delivery on orders excluding certain products & postcodes *

Sales & Technical 01462 421 333
Search
My Cart

PPG Sigmarine 40 *CLEARANCE*

SKU
id23495
UN1263 (Class: 3, Pk Grp: III)
An alkyd undercoating product suitable for use in all alkyd paint systems, designed to provide adhesion to anti-corrosive primers and old paint systems.
Available in 5 Litres
From £22.30 £18.58
In stock
Only %1 left
main product photo
Product Description

Please note, this product is now discontinued. However, we currently have a small supply of cancelled orders available at low cost. Please call our sales team for stock updates.

PPG Sigmarine 40 is an alkyd undercoating product suitable for use in all alkyd paint systems, designed to provide adhesion to anti-corrosive primers and old paint systems.

Sigmarine 40 is available in a selection of different shades and can be overcoated with a variety of different one component systems.

Best Uses

Sigmarine 40 can be applied to various different substrates as part of an alkyd coating system and works well as part of a system suitable for application to marine appliances.

Application

Sigmarine 40 has been specially formulated for maintenance work by using brush or roller and offers excellent flow to produce a smooth eggshell appearance. When applied in conditions of around 20°C, the surface will be touch dry after 2 hours and ready for a recoat after 16 hours. Sigmarine 40 dries well even at low temperatures but drying times will reduce significantly in these circumstances.

Surface and Environment

Sigmarine 40 is designed for use in the marine environment and has been specifically manufactured to provide protection and decoration to a number of pre painted surfaces and substrates coated with anti corrosive primers.

Technical Details

Notes

  • Suitable in alkyd paint systems.
  • Recoatable with various one component products.
  • Especially formulated for maintenance work by brush or roller.
  • Good adhesion to anticorrosive primers and old paint systems.
  • Easy application by brush with excellent fl ow, giving a smooth eggshell appearance.
  • Good drying properties even at low temperatures.

Technical Info

Components: Single Pack
Type: Alkyd undercoating
Finish: Semi Gloss
VOC Content: 412.0 g/l
Volume Solids: 45 +/- 2%
Suitable Substrates: Can be applied to various different substrates as part of an alkyd coating system
Application Method: Brush, Roller, Airless Spray or Air Spray
Theoretical Coverage: 12.9 m2/l for 35 microns
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): 35 microns (1.4 mils)
Induction Time: -
Pot Life: -
Touch Dry: 2 hours at 20°C
Overcoatable: After minimum 16 hours hours at 20°C
Fully Cured: -
Cleaner / Thinner: PPG Thinner 20-05
Shelf Life: At least 24 months when stored cool and dry
Packaging: Available in 5 and 20 Litres
System Info - PPG Daily Record Sheet (63.23 kB)
System Info - Project Job Sheet (89.24 kB)

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use