Sika® BentoShield® SS50 Bonding Tape is a single-sided adhesive tape, which consists of a butyl rubber adhesive that is covered with a release liner. BBA Certificate 16/5342 for waterproofing structures
Sika® BentoShield® SS50 Bonding Tape is used for sealing laps on the Sika BentoShield® MAX LM System.
The contact surfaces must be dry, clean and free of materials that could impair adhesion.
The Sika BentoShield® system must only be installed by trained contractors. Sika® BentoShield® SS50 Bonding Tape is not UV stabilised
and cannot be installed on structures permanently exposed to UV light and weathering. Do not apply tape during continuous or prolonged rainfall.
Characteristics / Advantages
- High adhesion of the butyl rubber adhesive
- High durability
- Easy and fast to install
- BBA Certificate 16/5342 for waterproofing structures
Notes on Application / Limitations
The Sika BentoShield® system must only be installed by trained contractors. Sika® BentoShield® SS50 Bonding Tape is not UV stabilised and cannot be installed on structures permanently exposed to UV light and weathering. Do not apply the Sika® BentoShield® SS50 Bonding Tape bonding tape during continuous or prolonged rainfall.
|Appearance:||White release liner over white butyl rubber adhesive|
|Suitable Substrates:||Used for sealing laps on the Sika BentoShield® MAX LM System|
|Theoretical Coverage:||25m Length|
|Dimensions:||Width; 50mm, Length: 25m, Thickness: 1.0mm|
|Shelf Life:||24 months from date of production if stored properly in unopened undamaged original packaging, in a horizontal position.|
|Packaging:||Available in 25m rolls|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.