Sika® BentoShield® Termination Strip is a galvanised steel bonding strip with 5mm holes at 15mm centres in a solid plastic holder.
Sika® BentoShield® Termination Strip is used for fixing and sealing the top edge of Sika BentoShield® MAX LM on vertical sections.
Sika® BentoShield® Termination Strip is used to seal the top edge of Sika BentoShield® MAX LM against ingress of water. It is fixed in place with the Sika
BentoShield® Fixing System.
The Sika BentoShield® MAX LM system must only be installed by trained contractors.
Characteristics / Advantages
▪ Corrosion resistant
▪ Secure fixing
▪ Easy and fast to install
|Type:||Hot dipped, galvanised steel|
|Appearance / Colour:||Galvanised steel roll in a red plastic holder|
|Dimensions:||Width: 12mm, Length: 10m , Thickness 1.0mm|
|Shelf Life:||Store in a dry place, safe from weathering and mechanical damage|
|Packaging:||Available in 10m rolls|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.