This product is unavailable in the UK. Please contact our technical team for a suitable alternative.
Sika Poxicolor HE New is a 2-pack aluminium epoxy primer that has been developed to offer a high performance coating that can be applied to manually prepared steel and galvanised steel.
Available in black Sika Poxicolor HE NEW is an over coatable primer that offers an economical solution to providing corrosion control to new or weathered galvanized steel as well as mild steel that has surface rust. Sika Poxicolor is surface tolerant elevating the need for sweep or sand blasting or where only mechanical cleaning with a power tool or hand tool is possible.
Sika Poxicolor HE NEW following surface preparation to St2 or St3. Poxicolor is best applied by airless sprayer although the required dry film thickness of 75 microns can be achieved by brush application making this an economical method of protection and corrosion control. The use of conventional high pressure spraying is also suitable for the application of Poxicolor. Spray application will offer the best results.
Sika Poxicolor HE NEW is approved according to German standard 'TL/TP-KOR-Stahlbauten', and is available in 3 colours including aluminium sand-yellow and red-brown by special order. Typical uses are chemical plants, bridges and coastal areas where exposure to harsh conditions are experienced.
- Poxicolor HE New offers a high-build application
- Fast patch drying and curing
- Very economically due to high coverage
- High build and diffusion density of the coating provide a good
- Excellent corrosion protection
- Surface tolerant so manual preparation is possible
- Application by Airless or convential spray
- Brush application is possible for small areas
- Typical uses are chemical plants, bridges and coastal areas
- Available in black
- Theoretical coverage 9.5 m2 per litre
- Available in 28 Kg tins.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.