Sika SikaCem 133 GP Gunite is a cement based, polymer modified one component general purpose repair mortar containing silica fume and high range water-reducing agents, meeting the requirements of Class R4 of BS EN 1504-3.
Sika SikaCem 133 GP Gunite is ideal as a large volume repair mortar for bridges, marine structures, tunnels, buildings and fire damaged structures. Ideal for internal and external application in place of R1, R2 and R3 mortars.
Sika SikaCem 133 GP Gunite is formulated for machine application using the dry process without set accelerators, repairs may be profiled and trowel finished where necessary.
- One component, ready to use
- Non silica aggregates
- Low rebound losses and dust formation during the spraying process
- Layer thickness's in one application overhead up to 100mm are possible
- Rapid strength gain without set accelerators
- Can be finished to a high standard
- Overcoatable with Sika reprofiling / levelling mortars and coatings
- Conforms to the requirements of BS EN 1504-3 R4 Classification Complies generally with the Highways Agency specification for repairs to highways structures.
|Type:||Cement Based Repair Mortar|
|Suitable Substrates:||For large volume repairs of concrete including bridges, marine structures, tunnels, buildings etc internally and externally|
|Theoretical Coverage:||Approx 2.2 - 2.3 Kg per m2 per mm|
|Surface Dry:||See datasheet|
|Fully Cured:||See datasheet|
|Cleaner / Thinner:||Clean all tools and application equipment with water immediately after use. Hardened / cured material can only be mechanically removed.|
|Shelf Life:||6 months in original unopened containers|
|Packaging:||Available in 25 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.