Clearance Special - Was £16.62 - Now only £14.71!
Sika Everbuild Water Seal is a solvent based clear clear water sealer for brick and uncoated masonry, sandstone stone and concrete walls.
Sika Everbuild Water Seal is a solvent based easy to apply coating that has been developed as a clear water sealer for brick and uncoated masonry, sandstone stone and concrete walls. Sika Everbuild Water Seal offers an economical solution to long term protection against water ingress from rain, damp and even frost damage for up to 10 years.
Not only will Water Seal protect against water penetration but due to an advanced formulation will penetrate deep into the surface and will not affect the appearance of the substrate. Due to the extremely small particles contained in this solution Water Seal can penetrate up to 5mm deep into the surface but will still allow existing water moisture to evaporate and once dry will allow the wall to breath. Sika Water seal offers excellent coverage of between 2.5 and 4 m2 per litre depending upon the porosity of the surface.
The surface to be treated should be dry and free from loose matter. Defective joints in brick and stonework should be re-pointed. It is not necessary to treat hair
cracks, but large cracks should be made good and allowed to dry before treatment. Efflorescence should, as far as possible, be removed by brushing the surface
of the re-pointed areas.
Stir before use. Apply by brush or low pressure spray in one coat, in conditions of adequate ventilation. The Sika® Water Seal is flooded on to the surface so that a run down of approximately 300mm is obtained.
- Sika Everbuild Water Seal is solvent based
- Suitable for use on brick, stone and masonry
- Offers up to 10 years protection
- Aesthetics of the substrate unchanged after application
- Protects against rain, damp and frost attack
- Clear in appearance
- Allows surface to breath
- Theoretical coverage of between 2.5 and 4 m2 per litre depending on porosity
- Allow 6 hours between coats
- Please read tin before application
- Available in 5 Litres
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.