This product is now discontinued. Please see Sika Sikafloor 3000 as a potential alternative.
Sikafloor-300N is a two part PUR elastic, low VOC, self smoothing comfort floor for interior use.
Sikafloor-300 N provides a decorative floor finish together with good mechanical and yellowing resistance. As it is solvent free and reduces the level of sound from footfall, it is ideal for use in hospitals, schools and showrooms.
Sikafloor-300 N provides a smooth wearing coating for concrete and cement based substrates. It is particularly suitable for hospitals, schools, showrooms and other venues that require a product which reduces noise caused by footfall,has good mechanical resistance and a low maintenance finish.
Attention must be paid to the substrate moisture content, r.h. and dew point, prior to application. Sikafloor-300 N should be poured onto the required substrate and spread evenly with a serrated trowel. A spiked roller should be used to roll in two directions, with a spiked roller. Paying attention to ensure an even thickness and to remove any entrapped air. If required Sikafloor Colourchips should be broadcast at this stage. Please read the technical data sheets for full preparation and application methods.
Surface and Environment
Sikafloor-300 N is suitable for interior concrete and cement based substrates.
- Sikafloor 300N two part PUR resin
- Low VOC emission certified
- Permanently elastic (crack bridging)
- Optional decorative (coloured chip) finish
- Good mechanical resistance
- High yellowing resistance
- Available in a large selection of house colours
- Theoretical coverage: 2.60 kg per square metres
- Size: 20 kg
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.