Sikafloor ProSeal Pro is a curing compound for concrete new and existing concrete floors and helps to control dust.
Sikafloor ProSeal Pro is a one component, low odour, clear acrylic, resin polymer solution. It is used to cure, harden and seal fresh or hardened concrete. Helping to control dust, it is suitable for new and existing concrete floor surfaces.
Sikafloor ProSeal Pro is used for curing and sealing fresh concrete floors. It is suitable for exterior and interior applications.
Apply Sikafloor ProSeal Pro in one coat with a spray or roller. All dust, loose or friable material must be removed, preferably by brush and/or vacuum, before application.
Surface and Environment
Sikafloor ProSeal Pro is a clear liquid which retains this appearance when cured. Sikafloor ProSeal Pro is non-yellowing and effectively cures and seals concrete surfaces in a single coat.
- Easy application process
- Single coat application
- Mix with an electric stirrer on low speed
|Type:||Acrylic resin polymer solution|
|Stock Colours:||Clear Liquid|
|Suitable Substrates:||For curing and sealing of fresh concrete floors|
|Application Method:||Low Pressure Spray|
0.1 - 0.2 Litres per m2 per coat. (5 - 10 m2/l/coat)
To conform with ASTM C-309, ensure a total of 0.2 l/m2 is applied. This figure is theoretical and does not include for any additional material required due to surface porosity, surface profile, variations in level and wastage, etc.
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Foot Traffic:||Approx 8 hours at 20°C|
|Fully Cured:||20 hours at 20°C|
|Cleaner / Thinner:||Clean all tools and application equipment with Sika Thinner C immediately after use|
|Shelf Life:||12 months|
|Packaging:||Available in 25 and 200 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.