Please note, this product is now discontinued. See Teknos Pro 5, 7 or 10 as potential alternatives.
Teknos Biora Balance is a full matt, water borne acrylate dispersion wall and ceiling paint for dry interior areas.
Teknos Biora Balance is formulated for use on interior walls and ceilings in e.g. nurseries, bedrooms and lounges and other similar places. Teknos Biora Balance can be applied onto concrete, plaster, filler, brick and building board surfaces.
Teknos Biora Balance is also suitable for repainting old alkyd and dispersion paint coats.
Clean new surfaces from dust and dirt. Wash previously painted surfaces with Teknos Rensa Super paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. For smoothing of irregularities in the surface choose a suitable filler from the Teknos Silora series. The dried filler is sanded down and the dust removed.
Steel surfaces are primed with Teknos Ferrex Aqua Anti-corrosive paint. Other new and previously painted surfaces are primed with Teknos Biora 3 Primer and Ceiling Paint or painted straight with Teknos Biora Balance. Before use stir the paint thoroughly.
Thin with water when needed. Reserve a sufficient amount of paint in the same vessel for each uniform surface. Colour differences will thus be avoided. Apply once or twice by brush, roller or spray. Suitable nozzle for airless spray is 0.017 - 0.021".
|Type:||Water Borne Acrylate|
|Stock Colours:||Just tints|
|Tintable:||Yes, to most RAL or British Standard codes and Teknos Internior Colour Card. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||30 g/L|
|Suitable Substrates:||For concrete, plaster, filler, brick and building board surfaces|
|Application Method:||Brush, Roller or Spray|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Dust Free:||30 minutes at 23°C|
|Overcoatable:||After 1 hour at 23°C|
|Cleaner / Thinner:||Water. Wash the equipment immediately after use with detergent and warm water.|
|Shelf Life:||See container|
|Packaging:||Available in 2.7 and 9 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.