£7.75 delivery on orders excluding certain products & postcodes *
Teknos Hydropur 2K 7590 is a protective top coat for interior and exterior wood. This wood varnish will improve weather and mechanical resistance of the wood. It will also provide colour retention and gloss stability for lasting protection.
Basically all surfaces must be well cleaned, dry and free of oil or grease. Paint adhesion is dependent on the substrate composition as well as the application technique, as described in Application Data Sheets. If recoating old paint films, it is essential to check the adhesion of the original coating to the substrate and its ability to support a new coating. To check the suitability of the coating system it is essential to carry out an adhesion check, for example: cross hatch test EN ISO 2409.
Before processing, the coating and hardener must be homogeneously mixed both individually and together, preferably with a table mixer. The processing viscosity can be adjusted with water with subsequent homogenisation.
Apply via gravity fed gun. Use a brush for touch ups.
IMPORTANT NOTICE: From 24th August 2023, adequate training is required before industrial or professional use of this product. Training can be accessed at: https://www.safeusediisocyanates.eu
Components: | Two Pack |
Type: | Water Based Varnish |
Finish: | 10% and 40% (Matt and Semi Matt) |
Stock Colours: | Colourless |
Tintable: | No |
VOC Content: | 79 g/L |
Volume Solids: | 40% |
Suitable Substrates: | Internal and External Wood |
Application Method: | Gravity Fed Gun, Brush |
Theoretical Coverage: | 0.92 to 10.9 m2 per kg for 30 μm DFT |
Wet Film Thickness (WFT): | |
Dry Film Thickness (DFT): | 30 microns |
Induction Time: | - |
Pot Life: | 2 hours at 20°C |
Touch Dry: | 2 hours at 20°C |
Overcoatable: | After 24 hours at 20°C |
Fully Cured: | 7 days at 20°C |
Cleaner / Thinner: | Wash equipment immediately with water |
Shelf Life: | 15 months minimum in original unopened containers. |
Packaging: | Available in 5 Kg |