Teknos Nordica Primer is suitable for application onto walls, doors, and other external wooden surfaces, when they are going to be top coated with acrylate, alkyd or oil paints. Suitable for vertical surfaces or surfaces that will not be walked on.
Unpainted surfaces should be cleaned from loose wood fibres, dirt and dust. Clean mildewed surfaces with Teknos Renda Façade façade cleaner. Apply a coat of clear Teknos Woodex Aqua Base priming oil and allow to dry for one day.
Previously painted wooden surfaces that have been cleaned from poorly adherent paint, loose wood fibres and other impurities are washed, if needed, with Teknos Renda Façade facade cleaner. Wooden parts that are in poor condition are replaced with new ones. Bare wooden surfaces are primed with clear Teknos Woodex Aqua Base priming oil and are allowed to dry for one day.
Teknos Nordica Primer is to be painted only on bare wood prepared according to the surface preparation instructions above, not on top of old paint.
Clean metal surfaces from loose rust, grease and dirt and wire-brush the surfaces before the bare metal surfaces are painted with Teknos Ferrex Aqua.
Before use stir the paint thoroughly. Apply by brush or spray. For painting wooden surfaces dilute the paint about 5 - 10% with water. If the paint is applied by spray, the surface is to be finished by a brush to ensure the adhesion.
|Type:||Water Borne Alkyd|
|Tintable:||Yes, to Teknos Shades, RAL and BS colours. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||130.0g per Litre|
|Suitable Substrates:||Walls, doors etc. wooden surfaces outdoors, when they are going to be top coated with acrylate, alkyd or oil paints.|
|Application Method:||Brush or Spray|
|Theoretical Coverage:||6 - 10m2 per litre|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Touch Dry:||3 hours at 23°C|
|Overcoatable:||16 hours at 23°C|
|Cleaner / Thinner:||Water|
|Packaging:||Available in 0.9, 2.7 and 9 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.