Teknos Teknal Primer 2500

SKU
id18349
UN1263 (Class: 3, Pk Grp: III)
A thixotropic quick-drying primer that can be diluted with white spirit.
Available in 20 Litres in White
£116.59 £97.16
In stock
Product Description

Teknos Teknal Primer 2500 is a thixotropic solvent borne quick-drying primer that can be diluted with white spirit. Suitable for dip coating and spraying it dries fast with good sanding properties.

Best Uses

Teknal Primer 2500 is best used on wooden window frames. Further treatment can be done with Teknos Aquatop 2600 or Teknos Aquatop 1300 products. It is always best to check with the manufacturer to make sure of the suitability of the product for the object in question, before use.

Application

The surface must be clean and dry. The moisture content of the wood needs to be below 20%. 

During the application and drying period the temperature of the ambient air, the surface and the paint should be above +5C and the relative air humidity below 80%.
Before use stir the paint thoroughly. Apply by dip coating or by spraying. For dip coating the paint is thinned 30% by volume with thinner Teknos Teknosolv 9507.

Technical Details
Components: Single Pack
Type: Solvent-borne
Finish: Matt
Stock Colours: White
Tintable: No
VOC Content: abt. 480 g/l
Volume Solids: 39 +/-2% by volume
Suitable Substrates: Wooden Window Frames
Application Method: Dip Coating or Spraying
Theoretical Coverage: -
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: After 1 hour 40 minutes at 23°C
Overcoatable: After 5 hours at 23°C
Fully Cured: -
Cleaner / Thinner: Teknosolv 9507
Storage: Store in a cool place and in tightly closed containers
Packaging: Available in 20 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.