Teknos Timantti 7 is especially suited for use on walls and ceilings in dry and humid spaces where good washability and abrasion resistance is required, e.g. in halls, staircases, kindergartens, schools, hospitals, food processing premises and other similar facilities.
Teknos Timantti 7 can be applied to primed concrete, plaster, stopper, brick, and building board surfaces according to the painting directions. The paint is also suitable for repainting old alkyd and dispersion paint coats.
Clean the surface from dirt and dust. Wash previously painted, dirty surfaces with Teknos Rensa Super paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. For smoothing of irregularities in the surface choose a suitable filler from the Teknos Silora series. The dried filler is sanded down and the dust removed.
For Humid Areas: Prime concrete, plaster, stopper, brick, and building board surfaces with Teknos Timantti W moisture sealer according to the directions for use.
For Dry Areas: Prime the surfaces previously mentioned with Teknos Timantti 3 Primer.
For Steel Surfaces: Prime with Teknos Ferrex Aqua anti-corrosive paint.
For Galvanized Surfaces: Prime galvanized surfaces with Teknos Timantti 3 Primer.
Before use stir the paint thoroughly. The paint can be diluted with water, if required, but dilution may impair the coverage of the paint. Apply by roller, spray or brush.
Recommended nozzle size for airless spray is 0.017 - 0.021''.
|Type:||Waterborne Acrylate Dispersion|
|Stock Colours:||Just tints|
|Tintable:||Yes, tintable to Teknos Interior Colours and RAL, BS Shades. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||30.0g per Litre|
|Suitable Substrates:||For application onto primed concrete, plaster, stopper, brick, and building board surfaces|
|Application Method:||Brush, Roller or Spray|
|Theoretical Coverage:||Previously painted surface: 7 -10m2 per litre
Filler and wood fibre board: 6 - 8m2 per litre
Concrete and plastered surface 4 - 7m2 per litre
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Dust Free:||1 hour at 23°C|
|Overcoatable:||2 hours at 23°C|
|Cleaner / Thinner:||Water|
|Packaging:||Available in 2.7, 9 and 18 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.