Teknos Topaz 20 / 55 Parquet Lacquer

SKU
id25230
Non Hazardous
A water borne, single pack clear parquet lacquer available in semi matt and semi gloss finishes.
Available in 5 Litres in Clear
From £92.48 £77.07
In stock
Only %1 left
Product Description

Teknos Topaz Parquet Lacquer is a water borne, single pack clear parquet lacquer available in semi matt and semi gloss finishes.

Best Uses

Teknos Topaz Parquet Lacquer is suitable for application onto parquet and wooden floors in homes as well as public spaces. Provides good wear resistance. The product has been classified to Group M1 in Emission Classification of building materials. The product has been awarded the Key Flag Symbol (Avainlippu), marking Finnish origin.

  • Teknos Topaz 20 - Semi Matt finish
  • Teknos Topaz 55 - Semi Gloss finish

Teknos Topaz 20 / 55 is suitable for roller application on parquet and wooden floors. Not suitable for the lacquering of diamond pine and chemically treated wood such as smoked oak.

Application

The wood surface must be dry, well sanded and free from sanding dust and other dirt.

Untreated and clean-sanded surfaces:
Fill the gaps with GAP parquet putty. Prime the wooden surface with Teknos water-based primer lacquer according to the instructions. Intersand, if necessary, with sandpaper or an abrasive net n:o 150 after the first primer coat. Apply 2–3 coats of Teknos Topaz parquet lacquer along the grain of the wood. The drying time between coats should be at least two hours,preferably left overnight.

Factory lacquered parquets or previously lacquered floors:
Clean the floor thoroughly. Inter-sand gently by using sandpaper or an abrasive net n:o 100–150. Remove the sanding dust with a vacuum cleaner and finish with a clean damp cloth. Apply 1 coat of lacquer by using a stainless steel applicator and finish with 1–2 coats. In unclear situations, conduct preliminary tests to ensure proper adhesion to old lacquer. Note: If the floor has previously been treated with oil, urethane or alkyd lacquer, the floor must be sanded to bare wood before lacquering.

Uneven floors should be lacquered with a brush as follows:
Apply first a thin lacquer coat. After the lacquer has dried, inter-sand gently by using sandpaper n:o 100–150. After proper cleaning, apply two more coats. Ensure that the previous lacquer coat has fully dried before applying a new one. Always stir lacquer thoroughly before use. Some rubber types in carpets and anti-slip materials may contain plasticisers that can cause permanent surface and colour damage to the lacquer and oil coat.

Technical Details
Components: Single Pack
Type: Water borne
Finish: Semi Matt, Semi Gloss
Stock Colours: Clear
Tintable: No
VOC Content: 140 g/L
Volume Solids: 29%
Suitable Substrates: Parquet and wooden internal flooring
Application Method: Lacquer Roller, Steel Trowel, Brush
Theoretical Coverage: One coat with lacquer roller: 8 - 10 m2 per litre
One coat with steel trowel (maintenance lacquering): Approx 25 m2 per litre
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):
Induction Time: -
Pot Life: -
Light Traffic Ready: 1 - 2 days at 20°C
Overcoatable:
Fully Cured:
Cleaner / Thinner: Water. Wash the equipment immediately after use with water and Teknos Rensa Brush cleaner.
Shelf Life: 1 year in original unopened containers.
Packaging: Available in 5 Litres
Product Video

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.