Tensid Algo Bio Inhibitor is a non hazardous ready to use algae remover and inhibitor on amultitude of surfaces. Algo Bio has the unique ability to prevent regrowth for a period of up to 3 years. Approved for London Underground use under LuL ID2039.
Tensid Algo Bio Inhibitor is ideal for the removal of algae, moss and other organic growth from masonry, concrete and timber surfaces. For general use on London Underground Premises, it can potentially prevent regrowth for a period up to 3 years.
Apply with brush or low compression sprayer. Always test each type of surface to ensure suitability and desired results. Apply test area according to the following application procedures.
Wood and masonry surfaces
Apply undiluted product by spray or brush, algae and other organic growth will begin to die after 24 hours, and will generally be washed away by wind and rain over the next few days. Heavily affected areas may require pre-cleaning and/or a second treatment. Apply to a visibly dry surface. Note: After application of Algo, results can sometimes take up to two weeks, dependent upon the type of algae. Once Algo has killed the algae, it can take time for the dead spores to be blown away. ;In addition, the conditions have to be taken into ;consideration wind, rain, sun and shade all determine how long the area stays clean.
Algo is effective in controlling most bacteria and micro-organisms on a multitude of surfaces, after initial removal of heavy surface contamination. Algo should be applied and left to dry, it will form an invisible film on the surface that will inhibit future growth of bacteria and all micro organisms as well as associated unpleasant organic odours.
London Underground Approved Item No.2039
- Wear suitable PPE
|Stock Colours:||Colourless Liquid|
|Suitable Substrates:||Concrete, Masonry, Timber and general use on LU Premises|
|Application Method:||Apply with brush or low compression sprayer|
|Theoretical Coverage:||6m2 per litre (coverage rates will vary according to character of the surface)|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Fully Cured:||Algae and other organic growth will begin to die after 24 hours, however results can take up to 2 weeks|
|Cleaner / Thinner:||-|
|Shelf Life:||up to 1 year in a tightly sealed, unopened container and in a frost free environment|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.