*Tensid Tavec 203 Stripper

This product is discontinued. Approved for use on London Underground, LuL APR No.92.
Out of stock
Product Description

Please note, this product is now discontinued. Contact our technical team for a suitable alternative.

Tensid Tavec 203 Stripper is a biodegradable multiple layer paint stripper, formulated for removal of most paint types, urethanes and other coatings. Approved for London Underground use under LuL ID92.

Best Uses

Tensid Tevac 203 is particularly effective for removal of paint from metal surfaces. It can be used for most paint types, strips multiple layers of paint, is biodegradable and non toxic.


Protect surrounding surfaces and beware of wind drift. Always test each type of surface to ensure suitability and desired results. Use an airless sprayer to apply a uniform coating of Tavec 203 Stripper to a dry surface so the paint is no longer visible. Allow the stripper to remain on the surface for 30 minutes & 24 hours. On multiple layers it may be necessary to remove the lifted layers and re-apply the product. Do not allow the product to dry on the surface. Pressure rinse with water.

It is important that a heavy layer of Tavec is applied, a guide line is that no paint can be seen after application of Tavec. This ensures that sufficient product is absorbed to lift off multiple paint layers. On areas that have been painted repeatedly with poor preparation top layers will delaminate quickly so several thin application/removal cycles may prove more effective. When pressure washing clean, netting can be placed below the area to collect the paint waste and make disposal easier.

Technical Details


  • London Underground Approved Item No.92 - This paint stripper replaces those which are based upon chlorinated solvents. It is also an alternative to grit blasting.

Technical Info

  • Wear suitable PPE
Components: Single Pack
Type: Waterbased paint stripper
Finish: -
Stock Colours: Blue paste
Tintable: No
VOC Content: -
Volume Solids: -
Suitable Substrates: Metal surfaces
Application Method: Airless Sprayer with a nozzle tip size 0.025 or larger
Theoretical Coverage: Approximately 1-4m2 per litre (coverage rates will vary according to character of the surface)
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: -
Overcoatable: -
Fully Cured: Allow the stripper to remain on the surface for 30 minutes to 24 hours - Do not allow the product to dry
Cleaner / Thinner: -
Shelf Life: Up to 1 year in a tightly sealed, unopened container and in a frost free environment
Packaging: Available in 20 Litres