This product is now discontinued. Please call our technical team for an alternative.
Apply a coat of Textrol Narce directly to the timber in the direction of the wood fibers and the full length of the plank andallow at least 3-4 hours and then apply the second coat but donot allow more than 36 hours between coats.
If spray application, sanding between coats is always recommended to improve penetration and to give a uniform smooth appearance.
Note: Our technical department is available to advise you and send you a technical manual.
- Non film forming – will not crack, peel or flake
- Protects against moisture and UV damage
- Easy one coat maintenance – no stripping or sanding
- Theoretical coverage 14 m2 per litre
- Application temperature: 10 degrees C to - 30 degrees C
- Allow between 3 - 4 hours between coats
- Do not dilute
- Stir thoroughly before and during implementation
- Full cure 24 to 48 hours
- Available in 2.5 Litres
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.