Timberex Bio-C is a gentle cleaning agent specially formulated to pH7 for use on oiled timber floors.
Timberex Bio-C Cleaner is recommended for use on all oil treated surfaces. The cleaner is pH-neutral and will not leave any grey fi lm on the surface. Use
the right mixture and damp cloth for regular cleaning. Rule of thumb: The surface must be dry within 5-10 minutes or too much water has been used.
- Does not leave smears
- Low viscosity, and disperses easily in cold water
Apply the mixed solution sparingly with a damp mop, cloth or foam pad. The mixed solution may also be applied by trigger operated hand spray. Wipe the surface with a clean, slightly damp cloth and leave to dry. Timberex Bio-C must be diluted correctly. Complete a small test area fi rst. Damage may occur to timber fl oors subjected to excessive moisture/water.
Light cleaning: Mix 100ml of Timberex Bio-C with 5 litres of water.
Heavy cleaning: Mix 250ml of Timberex Bio-C with 5 litres of water.
- Light cleaning: Mix 100ml of Timberex Bio-C with 5 litres of water.
- Heavy cleaning: Mix 250ml of Timberex Bio-C with 5 litres of water.
- Available in 5 Litres
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.