Torlife TP Coloured Gloss Finish is a high performance, two pack, durable anti-graffiti coating for external surfaces with an extended redecoration cycle.
Torlife TP Coloured Gloss Finish is an anti graffiti coating system specifically designed to withstand graffiti attack. Torlife TP is a tough, high performance system which, when applied correctly, provides excellent graffiti removal properties.
It is available in gloss, satin, coloured or clear finishes. Torlife TP Coloured Gloss Finish is a two pack solvent based polyurethane coating system with excellent durability and UV colour stability. Torlife TP Coloured Gloss Finish provides an extremely hard wearing decorative finish combined with a class 0 fire rating when applied to new, bare or stripped surfaces.
Torlife TP Coloured Gloss Finish is best used as a barrier against graffiti attack. Once applied correctly, graffiti can be removed from the painted surfaces by using the Tor range of graffiti removal products. Torlife TP Coloured Gloss Finish Anti Graffiti provides protection to a wide range of substrates including wood, metals, masonry and natural stonework; whilst maintaining and preserving the substrates appearance.
Also for use in industrial applications, providing outstanding resistance to weathering, high abrasion, solvent and chemical resistance and excellent colour fastness.
Suitable for use over clean wall substrates. Mix 6:1 by Volume. Base and activator supplied in correct proportions. Add all activator to base container. Mix thoroughly for at least 5 mins until product is smooth and even. Allow to rest 5 mins before using. Do not mix part units. Badly activated or incorrectly mixed materials will affect performance and may cause early failure or discolouration. For communal areas, apply 2 coats by short pile mohair roller (small areas can be brushed).
Surface and Environment
Torlife TP Coloured Gloss Finish is designed for use on most external building substrates, including, new bare or previously painted, metals, brick, masonry, concrete, render, timber and uPVC.
|Stock Colours:||Light Grey, Jet Black, Pure White|
|Tintable:||Yes. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||max 500 g/l|
|Suitable Substrates:||External surfaces with an extended redecoration cycle|
|Application Method:||Brush or short pile mohair roller. For industrial applications please contact our Technical Team|
|Theoretical Coverage:||10 square metres per litre|
|Wet Film Thickness (WFT):||100 microns|
|Dry Film Thickness (DFT):||50 microns|
|Pot Life:||Approximately 8 hours|
|Touch Dry:||1 hour at 20°C|
|Overcoatable:||After minimum 8 hours to a maximum of 48 hours at 20°C|
|Hard Dry:||8 hours at 20°C|
|Cleaner / Thinner:||Tor TH99|
|Shelf Life:||2 years in unopened containers|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.