Torlife TP Satin Lacquer is a two pack, high performance, clear anti graffiti finish for use as the finish coats of Torlife TP Clear Gloss or Satin.
Torlife TP Satin Lacquer provides a long life, extremely durable and easily cleaned permanent anti-graffiti system for external surfaces, including masonry, concrete, natural stonework and some types of hardwood whilst maintaining and preserving their appearance. Also for use as the finish coats of the Torflake system.
Base and activator supplied in correct proportions. Add all activator to base container. Mix thoroughly for at least 5 mins until product is smooth and even. Allow to rest 5 mins before using. Do not part mix products. Badly activated or incorrectly mixed materials will affect performance and may cause early failure or discolouration. Apply 2 coats by short pile mohair roller or brush.
For Coating Torflake: Apply over Torflake TP Adhesive PU805.
For Brick/Stone: Normally applied over Torguard SP Natural Stone Sealer EM337.
If applied directly over brick or stonework dry broom/wire brush substrate to remove as much loose and friable material as possible. Treat any mould or fungal growth with a Fungicidal Solution. Check that moisture content is less than 5.5 on protimeter screed scale. Ensure surface is clean dry and free of contamination.
- Appearance: Clear Satin
- Dry Film Thickness: 30 microns
- Wet Film Thickness: 83 microns
- Pot Life: 8 hours
- Touch Dry: 1 hour at 20°C
- Hard Dry: 8 hours at 20°C
- Overcoatable: 8 - 48 hours at 20°C
- Theoretical Coverage: 12m2 per litre
- Available in 5 Litres
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.