Bradite Industrial Degreaser TD39

SKU
id18604
Non Hazardous
An industrial detergent used for degreasing oily or soiled surfaces prior to painting.
Available in 1 and 5 Litres
From £54.40 £45.33
In stock
Only %1 left
Product Description

Bradite Industrial Degreaser TD39 is an aqueous alkaline low foaming detergent used for degreasing contaminated surfaces prior to painting.

Best Uses

Bradite Industrial Degreaser is ideally suited for degreasing oily or soiled surfaces and for removing road dirt.

Application

Mix thoroughly before use. Application and use should always conform to the codes of practice described in BS 6150 and BS 5493.

Brush – thin one part Industrial Degreaser TD39 with 9 parts warm water by volume. Apply diluted solution to substrate and scrub with a stiff bristle brush until heavy contamination is removed. Two or more applications may be necessary depending upon the amount of contamination present. After scrubbing, the surface should be rinsed thoroughly with water and allowed to dry before painting.

Spraying – this product is not recommended for application by spraying.

Technical Details
Components: Single Pack
Type: Low foaming detergent
Finish: -
Stock Colours: Pink
Tintable: No
VOC Content: <0.1 g/L
Volume Solids: -
Suitable Substrates: All substrates including Concrete, Plastic, Fibreglass and all finishes painted on steel and other substrates
Application Method: Brush
Theoretical Coverage: 20 m2/L (after dilution, 1 part TD39: 9 parts warm water)
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Density: 1.03 kg/L
Flash Point (Abel closed cup) Not applicable
Touch Dry: -
Overcoatable: -
Fully Cured: -
Cleaner / Thinner: Clean all equipment immediately after use with water for best results
Shelf Life: 6 months minimum in original unopened containers
Packaging: Available in 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use