Owatrol Mould Action Pre-Paint Treatment Spray will kill existing mould and mildew spores to prevent regrowth before you paint.
Mould Action is available in a 750ml spray that contains a powerful anti fungal to remove existing mould and mildew, killing spores to prevent regrowth. Used as a sterilising pre-treatment before painting Mould Action will wipe away mould and mildew spores from masonry, brick, wood, plaster, etc, preventing further mould growth on newly painted areas. Ideal for use in damp and humid areas such as kitchens, bathrooms, laundries, swimming pools, etc, helping to keep painted and tiled areas looking like new.
Mould Action is suitable for masonry, brick, wood, plaster, etc, and is an excellent sterilising pre-treatment for surfaces to be decorated. Used in conjunction with VC175 Tropical Mould Killer, Mould Action prevents the regrowth of mould and mildew, especially in damp and humid areas such as kitchens, bathrooms and laundries.
Apply Mould Action by spraying or wiping over the whole area to be painted and leave on the surface for 24 hours to allow complete penetration, then simply rinse, wash or brush off dead bacteria and allow to dry before painting. To prevent the regrowth of mould and mildew use Mould Action in conjunction with VC175 Tropical Mould Killer, keeping treated surfaces looking like new.
If you wish to stop further mould growth on newly painted areas, we would suggest adding a few drops of Owatrol VC175 Tropical Mould Killer into the paint and thoroughly mix before and during application.
- Easy to use, Mould Action kills and removes mildew and mould simply by wiping away
- Contains a powerful anti fungal agent
- Contains low toxicity ingredients with high anti-microbic activity
- Non-corrosive and ammonia free
- Mould Action is biodegradable
- Excellent as a pre-treatment to sterilise surfaces to be decorated
- Eliminates mould and mildew spores to prevent regrowth
- Excellent in damp and humid areas
- Covering 5 to 20 m2 depending on porosity of the surface and degree of contamination
- Available in 750ml Spray.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.