£7.75 delivery on orders excluding certain products & postcodes *
Remmers Clean Galena is suitable for the cleaning of external mineral surfaces such as limestone, concrete, stone, delicate statues and external stonework. This peel away mask type cleaner is ideal for the reduction of heavy metals, in particular lead, reduction of encrusted dirt and removal of stains caused by iron or copper compounds.
Ensure the substrate is stable and free from dust. Do not use on hot surfaces. Use a suitable tool to coarsely clean the substrate. Set up a trial area to determine the cleaning effect. Take appropriate measures to protect adjacent building components and materials that should not come into contact with the product.
Stir thoroughly and apply over the entire surface of the substrate using a suitable tool. Fill undercut areas and contours thoroughly with the material. Once completely dry (usually 24 hours after application), remove the film by carefully detaching using a spatula. After removing the skin, clean the treated surface with fresh water starting from the highest point.
Further cleaning procedures might be necessary, depending on the degree of contamination and the substrate. If needed, repeat the application.
Remmers Clean Galena is part of the range of Remmers Cleaners available from Promain.
Components: | Single Pack |
Type: | Emission Free |
Finish: | - |
Stock Colours: | - |
Tintable: | No |
VOC Content: | - |
Volume Solids: | - |
Suitable Substrates: | Mineral surfaces, in particular limestone |
Application Method: | Brush, scraper, smoothing trowel, airless spraying equipment, peristaltic pumps |
Theoretical Coverage: | Approx. 2 - 3 kg/m² on even surfaces |
Pot Life: | - |
Touch Dry: | Approx. 24 hours after application |
Overcoatable: | - |
Fully Cured: | - |
Cleaner / Thinner: | Clean tools immediately after use with water and detergent |
Shelf Life: | 12 months if stored unopened in its original container in a cool, dry place and protected against frost |
Packaging: | Available in 25 Kg |