Johnstone’s Stormshield Pliolite Based Masonry Finish is a premium quality, solvent-based masonry paint formulated for exterior use on cement rendering, rough cast, brick and concrete.
Johnstones Stormshield Pliolite Based Masonry Finish is ideal for external wall paint application to concrete, cement rendering, brick, stone, blockwork and pebble dash. Pliolite provides a smooth matt finish that has excellent adhesion to previously painted and suitably sealed surfaces. The Pliolite resin enables application at temperatures down to -5°C and becomes shower proof in 20 minutes, allowing all year round exterior decoration.
- Over 15 years life expectancy
- Shower proof in 20 minutes allowing all year round application
- A solvent-borne smooth matt coating for exterior walls
- Excellent adhesion to previously painted or untreated porous surfaces
All surfaces to be painted should be clean, dry and free from loose and flaking material. Repair cracks and defective areas and treat fungal or algal growth with Johnstone’s Sterilisation Wash as directed. Stir well. Easy to apply by brush or roller. Seal absorbent surfaces with a coat of Stormshield Stabilising Solution applied as directed. If more than one can of a colour is to be used in the same area, intermix before use.
- BBA Approved - Certificate No.95/3145
|Stock Colours:||Ivory, Magnolia, Country Cream, Florence, Strawberry Dawn, Mushroom, Spring Daffodil, Parchment, Bouquet, Petal, Nu-Stone, Marzipan, Willow Green, Harbour, Heather, Sandstone, Nectar, Ming Blue, Electra, Brick, Silver, Rumba, Safari, Sapphire, Fiesta Red, Dark Grey, Antique, Dark Green, Midnight and Tawny|
|Tintable:||Yes, to Johnstones Colour Range. Please note, bespoke tints are non refundable / exchangable.|
|VOC Content:||High VOC content 25–50%|
|Suitable Substrates:||Concrete, cement rendering, brick, stone, blockwork and pebble dash|
|Application Method:||Brush or roller|
|Theoretical Coverage:||Approximately 6m2 per litre, depending on the nature and porosity of the surface|
|Wet Film Thickness (WFT):||125μm|
|Dry Film Thickness (DFT):||41μm|
|Touch Dry:||1-2 hours. Showerproof in 20 minutes allowing all year round application|
|Recoatable:||16–24 hours under normal drying conditions|
|Cleaner / Thinner:||White Spirit or Turpentine Substitute.|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.