£7.75 delivery on orders excluding certain products & postcodes *
Rustoleum Paracem is a cladding and masonry paint, designed for external and internal application onto corrugated metal, masonry, cement rendering or plaster, concrete, plaster boards and wooden panels. Available in over 35,000 NCS, RAL and BS.4800 colours. Paracem is a microporous, water based, acrylic, dispersion substance for changing the colour of Plastisol Cladding or corrugated metal roofing.
Paracem offers unequalled durability, proven by countless outdoor structures that still look flawless after more than 10 years. It is best used for providing resistance to saponification and can be used on even the most alkaline surface such as fresh cement mortar, new concrete or plaster.
Paracem can be applied using brush, roller or airless spray and has a coverage rate of approximately 8-10m2 per litre. Available in 4, 10 and 20 litre, Paracem can be purchased in up to 35,000 different colours.
This particular paint is extremely wear resistant and can be used internally or externally on substrates like masonry, cement rendering or plaster, concrete, tiles, plaster boards, corrugated metal and wooden panels to provide a highly impermeable coating to rainwater.
If you require technical advice, check out our beginners guide to painting masonry, or contact us for support.
Here at Promain, we have a wide range of Masonry paint and external paint products for you to choose from. If you can’t find what you’re looking for, then get in touch with our team of experts who will be able to help you find your perfect exterior wall product.
Finish: | Satin Matt. (Gloss 60° ± 5%) |
Stock Colours: | White. |
Tintable: | Yes, to pastel colours. Please note, bespoke tints are non refundable / exchangeable. |
VOC Content: | 25g per Litre. |
Volume Solids: | ± 46%. |
Suitable Substrates: | Masonry, cement rendering or plaster, concrete, tiles, plaster boards and wooden panels. |
Application Method: | Airless Spray, Conventional Spray, Flat brushes, or dispersion rollers. If applying via conventional spray, dilute with 3-5% water. |
Application Temperature: | Minimum 5°C. Maximum relative humidity 80%. |
Theoretical Coverage: | 7 - 10m2 per litre per coat. |
Dry Film Thickness (DFT): | 45 microns per coat (at 10m2 per litre). |
Touch Dry: | 40 minutes at 20°C. |
Recoatable: | 4 hours. |
Cleaner / Thinner: | Do not dilute for exterior use. For interior use dilute with 5-10% water. Clean up with water. |
Shelf Life: | 2 years from date of production in unopened cans. Store in dry, well ventilated areas, not in direct sunlight between 5° - 35°C. |
Packaging: | Available in 4 and 10 Litres |
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.