KEIM Soldalit Fixativ

SKU
id9985
Non Hazardous
A sol-silicate binding agent and dilution for use with the Keim Soldalit system.
Available in 5 and 20 Litres
From £96.60 £80.50
In stock
Only %1 left
Product Description

Keim Soldalit Fixativ is a sol-silicate binding agent for use with the Keim Soldalit System.

Keim Soldalit Fixativ is a sol-silicate binding agent and dilution product, designed for use with the Keim Soldalit Paint System.

Best Uses

Keim Soldalit Fixativ is best used as a binding agent in conjunction with Keim Soldalit Silicate Paint to provide adhesion when used in an external environment.

  • Keim Soldalit Fixativ is used to consolidate friable surfaces as a binder coat and as a dilution coat for the Keim Soldalit system as required
  • As a pre-treatment: one coat of Keim Soldalit Fixativ undiluted on highly absorbent or friable substrates
  • Highly absorbent substrates: Keim Soldalit can be diluted with a maximum of 10% by weight of Keim Soldalit Fixativ

Application

Keim Soldalit Fixativ can be applied by mixing the product with Soldalit Silicate Paint or by brushing/rolling the material onto the surface prior to the application of Soldalit Paint.

  • As a pre-treatment one coat of Keim Soldalit Fixativ undiluted on highly absorbent or friable substrates
  • Highly absorbent substrates Keim Soldalit can be diluted with a maximum of 10% by weight of Keim Soldalit Fixativ.

Surface and Environment

Keim Soldalit Fixativ can be applied directly onto highly absorbent or friable surfaces or diluted with Keim Soldalit at about 10% to create a product that adheres better to porous substrates.

We recommend using Keim Facade Brush with this product to get the best finish possible.

Technical Details

Approvals & Certifications

  • Cradle to Cradle Certified™ Silver

Technical Info

Components: Single Pack
Type: Sol Silicate Binding Agent and Dilution
Finish: -
Stock Colours: Milky/Blue
Tintable: No
VOC Content: -
pH Value: approx. 11
Suitable Substrates: KEIM Soldalit Fixativ is used to consolidate friable surfaces as a binder coat and as a dilution coat for the KEIM Soldalit system as required.
Application Method: Brush
Theoretical Coverage: 0.1 - 0.2 Litres per m2 depending on absorbancy of the substrate
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Application Conditions: Ambient and substrate temperature above 5°C and below 30°C.
Pot Life: -
Surface Dry: -
Overcoatable: -
Fully Cured: -
Cleaner / Thinner: Clean immediately after use with water
Shelf Life: Approx. 12 months, if kept cool but frost free in tightly closed containers.
Packaging: Available in 5 and 20 Litres

Related Products