KEIM Restauro Top

SKU
id16436
Non Hazardous
A mineral dry bagged pre mixed restoration mortar with hydraulic binders used for professional stone repair.
Available in 30 Kg
From £232.20 £193.50
In stock
Only %1 left
Product Description

Keim Restauro Top is a mineral dry bagged pre mixed restoration mortar with hydraulic binders used for professional stone repair.

Best Uses

The Keim Restauro system consists of natural stone replacement materials for reproducing the colour and texture of the original stone. Keim Restauro Top can be used to restore stone surfaces on its own or as part of the Keim Restauro Stone Restoration system.

  • Easy to apply
  • Can be colour matched to the stone
  • Long lasting

Application

Remove loose material and old coats mechanically or with a water pressure jet. Keim Restauro Top should be mixed only with clean cold water, approximately 5lt per 30kg. For larger quantities use stirring machine or mixer. After a ripening period of 5 minutes the mortar should be of moist earth consistency. For moulding silicate resin moulds should be used. Apply to pre-wetted surfaces in one or more layers from 10mm to 30mm maximum.

Keim Restauro Top can be applied proud of the surface using a trowel, allowed to harden and then dressed back in a manner to suit the surrounding stonework. If necessary stainless steel reinforcements, screws and wires can be used to hold repair materials in place until the mortar is dry.

Technical Details

Notes

  • Bulk density: approx. 1.40g/cm3
  • Water consumption: 0.13 – 0.16l/kg
  • Compressive strength: approx. 10N/mm2
  • Bending tensile strength: approx. 4.1N/mm2
  • Modulus of elasticity: approx. 9.0KN/mm2

Technical Info

Components: Single Pack
Type: Mineral Dry Restoration Mortar
Finish: -
Stock Colours: Available in KEIM's Natural Stone Colour shades
Tintable: Yes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: -
Volume Solids: -
Suitable Substrates: Stone Surfaces
Application Method: Trowel
Theoretical Coverage: Approximately 10kg/m2 for 5mm thick repair
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Processing Time: Max 45min
Setting Time:  Approximately 5 hours
Touch Dry: -
Overcoatable: -
Fully Cured: -
Cleaner / Thinner: Clean tools immediately after use with water
Shelf Life: Approx. 6 months in tightly closed container
Packaging: Available in 30 Kg bags

Related Products