Owatrol Decking Paint is a water based premium finish for exterior timber decking, and is suitable for use on new wood, weathered wood and even previously treated timber.
Owatrol International warrants their Decking Paint against peeling on wooden decks for a period of 5 years from the date of purchase when applied to a properly prepared uncoated or stripped surface in accordance with the label instructions and Technical Data Sheet. Please refer to Technical Data Sheet and the Owatrol Decking Paint Warranty under our Data Sheet Tab.
Owatrol Decking Paint
Owatrol Decking Paint is a water based paint coating that has been specially developed as a premium finish for exterior timber, and is suitable for use on new wood, weathered wood and even previously treated wood. Owatrol Decking Paint is available in 10 stock colours designed to enhance the wood of the decking and also handrails in two simple to apply coats.
A key benefit offered by Owatrol Decking Paint is that it has been blended with Owatrol Emulsa-Bond (EB) that provides adhesion to the timber, not only vertical, but horizontal surfaces too. Owatrol Decking Paint is hard wearing and long lasting, unlike many wood paints and stains available, requires much less preparation before application and will provide a rich matt luster to both cladding and decking boards.
Before the application of Owatrol Decking Paint the surface must be correctly ared, For oil based stains we recommend the use of Owatrol DSP 800 allowed to work and rinse with clean water. For water based stains use Owatrol Prepdeck to remove existing stains followed by Owatrol Net-trol, this must be allowed to dry before the application of Decking Paint.
Owatrol Decking Paint can be applied by brush, roller, or airless spray, with a theoretical coverage of 8-10m2 per litre. Prior to application, all surfaces must be clean, dry and free from dirt to ensure the decking paint can adhere to the surface properly. After you have cleaned the surface appropriately, allow 48 hours for the surface to dry until there is a moisture content of 19% or less (this applies to all surfaces, new, weathered or previously coated).
Surface and Environment
This hard wearing coating will provide long lasting performance even in areas of high foot traffic and offers the benefit of a guarantee of 5 years against flaking and blistering on horizontal surfaces such as garden decking and even a 15 year warranty on vertical substrates such as cladding and sidings. Suitable for application to fencing, cladding and almost any exterior wooden surface.
- Use Owatrol Decking Paint on new or weathered softwood & hardwood
- Suitable for cedar, redwood and pressure-treated timber
- Long-lasting protection for outdoor wood furniture
- Contains Owatrols Emulsa-Bond (EB)
- Also suitable for fencing, cladding and other exterior wood surfaces
- Water based
- Will not flake, peel or blister
- Offers superior adhesion to most other coatings
- Hard wearing
- Use in areas of high footfall
- Guaranteed for up to 15 years on vertical surfaces
|Stock Colours:||Wide range of colours|
|Tintable:||Yes,upon request. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||130 g/L|
|Suitable Substrates:||For exterior wood etc.|
|Application Method:||Brush, Roller or Airless Spray|
|Theoretical Coverage:||8 - 10 m2 per litre|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Overcoatable:||3-4 hours, depending on temperature and humidity|
|Fully Cured:||24-48 hours, depending on temperature and humidity|
|Cleaner / Thinner:||Water|
|Shelf Life:||1 year minimum in original unopened packaging|
|Packaging:||Available in 2.5 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.