Teknos Woodex Solid Opaque Wood Stain is an alkyd-oil-based semi gloss and opaque wood stain for outdoor use. Contains agents that protect the wood against soiling and weathering.
Teknos Woodex Solid Opaque Wood Stain is an ideal product to stain exterior wood leaving the wood grain still visible.
Teknos Woodex Solid Opaque Wood Stain is formulated for the treatment of new and press-impregnated woodwork and wooden surfaces that have been treated with a solvent-borne wood stain. Not suitable on dispersion-based wood stains. Teknos Woodex Solid Opaque Wood Stain is suitable for use on walls, fences and window frames. For log surfaces we recommend Teknos Woodex transparent wood stains.
To prepare new wooden surfaces, treat the surface as soon as possible. At least the impregnation and priming would be best done in the summer of construction. Remove from the surface all loose matter, dirt and dust. Use Teknos Rensa Facade facade cleaner, when needed. Rinse the surfaces thoroughly with water and allow to dry. Apply one coat of clear Teknos Woodex Base priming oil. Allow to dry for one day. Prime surfaces with 10 - 15 % diluted Teknos Woodex Solid. Allow to dry for 1 - 3 days depending on the weather.
To prepare previously painted or old wooden surfaces, replace wooden parts that are in poor condition. Remove loose matter and "fluffy" wood. The adhesion of an old, thick paint layer to the substrate may have been weakened so much that the paint should be removed even if it seems intact. The old paint layer is removed primarily
by scraping or wire brushing, and possibly by heating the surface with an infra-red heater designed for this purpose. As a secondary means, a paint removing agent or blast cleaning can be used.
Wash dirty and/or mildewed surfaces with Teknos Rensa Facade facade cleaner. Rinse the surfaces thoroughly with water and allow to dry. Apply a coat of Teknos Woodex Base to bare wooden surfaces and prime with 20% diluted Teknos Woodex Solid. Allow to dry for 1 - 3 days depending on the weather.
Reserve a sufficient amount of opaque wood stain in one vessel for each uniform surface. Stir well and apply by brush or spray in 1 - 2 coats. Treat end grain especially carefully. Recommended nozzle size for airless spray is 0.013 - 0.017''.
|Type:||Alkyd Oil Based|
|Finish:||Opaque Semi Gloss|
|Stock Colours:||Just tints|
|Tintable:||Yes, to Teknos Opaque shades. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||400 g/L|
|Suitable Substrates:||For exterior wood|
|Application Method:||Brush or Airless Spray|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Touch Dry:||8 hours at 20°C|
|Overcoatable:||After 16 hours at 20°C|
|Cleaner / Thinner:||TEKNOSOLV 1621|
|Shelf Life:||See container|
|Packaging:||Available in 9 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.