Coo-Var MDF Primer is a water based primer for MDF surfaces. Available in White.
Coo-Var MDF Primer can be used to prime MDF furniture, desks, doors and more prior to a topcoat.
All surfaces should be clean, dry, sound and free from contaminants. New wood should be sanded prior to coating to ensure an adequate "key" is produced.
Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.
Mix well before use.
|VOC Content:||30 g/L|
|Suitable Substrates:||For MDF|
|Theoretical Coverage:||13 m2 per litre at 35 microns|
|Wet Film Thickness (WFT):||75 microns|
|Dry Film Thickness (DFT):||35 - 40 microns|
|Touch Dry:||30 minutes at 20°C|
|Overcoatable:||After 6 hours at 20°C|
|Fully Cured:||5 - 7 days at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||See container|
|Packaging:||Available in 2.5 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.