Rustoleum Trade 6050 Multi Primer

SKU id21801 Non Hazardous
A universal, water-based primer for wood, hard plastics, MDF and non-ferrous metals (aluminium, zinc etc.). For interior and exterior use.
Available in 2.5 Litres in White
£27.00 (£32.40 Inc VAT)

Product Description

Please note, this product has a 2 day lead time for delivery.

Rustoleum 6050 Multi Primer is a universal, water-based primer for wood, hard plastics, MDF and non-ferrous metals (aluminium, zinc etc.). For interior and exterior use.

Best Uses

Rust-Oleum 6050 Multi Primer is widely usable, water-based, quick drying, highly adhesive, and high-build primer for wood, MDF, hard plastics, and non-ferrous metals (e.g. aluminium, zinc, etc.).

Rust-Oleum 6050 Multi Primer should be used as the first coat (undercoat) on untreated or stripped wood, plastic and non-ferrous metals. Rust-Oleum Multiprimer can remain unaffected for several months without any problems and can be applied to wood with a maximum moisture level of 20%. Finish Rust-Oleum Multiprimer with acrylic, alkyd and dispersion paints.

Application

The surface must be load-bearing, clean, dry, and free of dust and grease. With wood frames, round off sharp edges so that you can apply a good coating.

For treated / untreated wood

  • Clean all the wood using Rustoleum Universol
  • Sand away discoloured wood down to the healthy wood and prime with Rust-Oleum 6050 Multiprimer
  • Carry out repairs as needed, sand, and remove all dust
  • Prime untreated wood with Rust-Oleum 6050 Multi Primer
  • Once dry, sand lightly, and remove all dust
  • Finish with a lacquer, such as Rust-Oleum Combicolor or Mathys Fassilux

For existing old layers

  • Remove old loose layers
  • Clean all the wood using Rustoleum Universol
  • Sand away discoloured wood down to the healthy wood and prime with Rust-Oleum 6050 Multi Primer
  • Carry out repairs as needed and prime with Rust-Oleum Multi Primer. Once dry, sand, and remove all dust
  • Prime stripped parts with Rust-Oleum Multiprimer. Once dry, sand lightly, and remove all dust
  • Finish with a lacquer, such as Rust-Oleum Combicolor or Mathys Fassilux

For existing intact paint layers

  • Clean intact layers using Rustoleum Universol
  • Thoroughly sand the surface
  • Touch up using Rust-Oleum Multi Primer
  • Once dry, sand lightly and remove all dust
  • Finish with a lacquer, such as Rust-Oleum Combicolor or Mathys Fassilux

The above systems serve as a general description for most common surfaces. For special applications and/or extensive advice, feel free to contact our technical team.

Stir thoroughly before use. Use a suitable brush or roller to apply one or more layers. Always work wet-on-wet to prevent brush marks. Do not touch up while drying.

Recommended Products To Use


Rustoleum Fassilux Aqua XPE Gloss

Rustoleum Fassilux Aqua XPE Gloss

A tintable water based scratch resistant wood lacquer for interior and exterior wood.

£45.25 (£54.30 Inc VAT)
Rustoleum Fassilux Aqua XPE Satin, 2.5 Litres

Rustoleum Fassilux Aqua XPE Satin, 2.5 Litres

A scratch resistant non yellowing water based paint for wood, this wood lacquer is for interior and exterior application.

£45.25 (£54.30 Inc VAT)
Rustoleum Fassilux Aqua XPE Matt

Rustoleum Fassilux Aqua XPE Matt

A Non Yellowing Tintable Waterbased Paint for Wood. Fassilux XPE Aqua Matt is also scratch resistant wood lacquer.

£45.25 (£54.30 Inc VAT)