Teknos Aqua Filler 1100 is a water-borne primer based on acrylic for internal wooden laths, doors as well as MDF and fibreboard.
Teknos Aqua Filler 1100 is formulated for priming wooden laths and doors as well as MDF and fibre board indoors. The paint dries quickly and it is easy to rub down. Teknos AquaFiller 1100 gives a surface that has good filling properties and that can be top coated with water-borne paints.
The surface must be clean and dry. The moisture content of the wood is to be below 20%. The temperature of the air, the surface and the paint shall be above +15°C and the relative humidity of the air below 80% during the time of application and drying. The best result is achieved when the temperature of the air is +23 - +38°C, the relative humidity of the air 50 - 70% and the ventilation is good.
Before use stir the paint thoroughly. Apply the paint by spray. Application with undiluted paint is recommended, but the paint can be diluted with water, if required.
|VOC Content:||33.0g per Litre|
|Suitable Substrates:||For wooden laths and doors as well as MDF and fibre board indoors|
|Theoretical Coverage:||6 - 8 m2 per litre|
|Wet Film Thickness (WFT):||125 - 167 microns|
|Dry Film Thickness (DFT):||48 - 64 microns|
|Touch Dry:||40 minutes at 23°C|
|Overcoatable:||After 1 hour at 23°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||The storage stability is shown on the label. Store in a tightly closed containers. The best storage temperature is +10°C - +25°C.|
|Packaging:||Available in 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.