Lacq Rapidoil 2C

SKU id24872 Non Hazardous
A two pack protective coloured coating for internal wooden flooring, furniture and other wooden surfaces. Protects in a single coat.
Available in 1 Litre
£54.90 (£65.88 Inc VAT)
*These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.
£54.90 (£65.88 Inc VAT)

Product Description

Lacq Rapidoil 2C is a two pack protective coloured coating suitable for internal wooden flooring, furniture and other wooden surfaces. Protects in a single coat.

Best Uses

Lacq Rapidoil 2C is formulated to colour and protect internal wooden surfaces with a single coat. Allowing for high penetration into the wooden surface, Lacq Rapidoil 2C nourishes the wood from within.

Suitable for all wooden internal surfaces such as flooring and furniture, this 2 pack floor coating will enrich the natural look of the wood providing durable protection in a single coat.

  • 95% renewable product
  • 8 premixed colours which can be used together to form new colours
  • Completely solvent free
  • Durable against heat


For Untreated wooden surfaces

Sand the surface according to the standards applied on the wood. Never sand above 120 grit. Be aware that sanding marks and other inconsistencies will be extra visible after applying Lacq Rapidoil 2C. After sanding make sure all dust and other remains are removed thoroughly.

Pour Part A and B together at a ratio of 3:1. Stir thoroughly for about 2 minutes via mechanical mixer. Before applying Rapidoil, be sure the surface is completely dry. Use a small amount of Rapidoil and apply it on parts of the total surface of approx.. 5-10m2. Apply using a lint free cloth.

Allow Rapidoil to work for a few minutes. Within 15 minutes, remove the excess oil using a clean lint free cloth. The surface must be dry to handle. Use this method for every zone.

In well ventilated rooms, the surface can be used again in just 24-36 hours. After five days the surface can be cleaned using water and a suitable soap. Tools can be cleaned using white spirit.

Please note, cloths used during application and clean up are at risk of self igniting. Always douse in copious water.