Zinga Zingalufer is a single pack polyurethane MIO sealer suitable for use over Zinga and Aquazinga, providing a protective seal against salt and chemical exposure.
Zingalufer can be used an an intermediate layer or topcoat for an existing layer of Zinga in immersed or chemical environments. Examples of suitable projects include ship hulls and sewage works. Micaceous iron oxides (MIO) create the special lamellar structure which create a very tight paint film for optimal barrier protection and corrosion resistance. Zingalufer is used as a sealer on ZINGA, as intermediate coat in a three layer ZINGA system.
When the waiting time between the successive coats is abnormally prolonged or in extremely polluted areas, the Zinganised surface can become contaminated. All contaminations that hamper the adhesion of the paint should be removed by appropriate means. Surfaces contaminated with oil and grease should be washed
down with solvent, alkaline solutions or emulsifier. Salt deposits or other water-soluble contaminations should be removed with water and brush, water under high pressure or steam. Possible white rust on ZINGA should be removed with water and rigid nylon brush.