Zinsser Drywall Pro 2-in-1 is a unique priming and sealing system for preparing new or damaged dry wall, plaster and porous surfaces before painting, wallpapering, texturing and other decorative projects.
Drywall Pro 2-in-1 has been formulated to penetrate and seal these surfaces to create a sound, water-resistant and trouble-free foundation for painting, wallpapering, texturing and other projects. Drywall Pro 2-in-1 is a unique priming and sealing system for preparing new or damaged dry wall, plaster and porous surfaces for painting, wallpapering, texturing and other decorative projects.
Damaged drywall, new drywall, filler and joint compound skim coats, plaster, wallpaper, wall covering adhesive residue, texture paint and chalky, builder’s flat paint are potential problem surfaces for wall covering and painting because they are porous, moisture sensitive, loose or chalky.
Zinsser Drywall Pro 2-in-1 penetrates and seals these surfaces to create a sound, water-resistant, trouble-free foundation for painting, wallpapering, texturing and other projects. In addition Zinsser Drywall Pro 2-in-1 prevents bubbles that form when damaged dry wall is skim coated with filler or joint compound. It penetrates and seals damaged facing paper, restoring it to a sound surface for repairs, suitable for painting or wall covering. New gypsum drywall, joint compound and filler are very porous and can make finishes and coatings appear uneven. Zinsser® Drywall Pro 2-in-1 penetrates and uniformly seals these surfaces, creating a moisture resistant film that also protects drywall from blistering, tearing and other damage when redecorating in the future. Zinsser Drywall Pro 2-in-1 seals residual wallpaper adhesive and texture coatings, forming a water-resistant barrier that prevents water in topcoat primer or paint from affecting the surface.
- Drywall primed & sealed with Zinsser Drywall Pro 2-in-1
- Available in a white finish
- Alkali resistant
- Prevents bubbling
- No damage on redecoration when removing contract vinyl wallpaper
- Low odour
- High-hiding/ stain sealer
- For drywall, plaster & porous surfaces
- Water-based/ alkali resistant
- Application information
- Touch dry 30 minutes
- Hard dry 3 hours
- Recoatable 3 hours
- Do not dilute
- Protects dry wall against water-based paints & adhesives
- No other product combines priming & sealing properties
- Coverage 9-11m² per litre
- Available in 5 and 10 Litres
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.