Zinsser SealCoat Universal Sanding Sealer

SKU id10091 UN1263 (Class: 3, Pk Grp: III)
Zinsser Sealcoat Universal Sanding Sealer seals the wood to create a surface that can be easily sanded.
Available in 1 Litre
£21.15 (£25.38 Inc VAT)
£21.15 (£25.38 Inc VAT)

Product Description

Zinsser Sealcoat Universal Sanding Sealer seals the wood to create a surface that can be easily sanded.

Save time when finishing porous woods by starting with Rust-Oleum Zinsser Bulls Eye Sealcoat Universal Sanding Sealer. This high-building solution seals the wood to create a surface that can be easily sanded. Zinsser Sealcoat produces an ultra-smooth final finish suitable for painting or varnishing.

Best Uses

Zinsser Sealcoat is ideal as a sanding sealer for doors, trim, skirting boards, panelling, wainscoting, Cabinets, shelves, furniture, interior shutters, Floors, stairs, banisters and spindles. May be used to seal wood turnings, figurines, carvings, wicker, plaster, and other hobby/craft items. Sealer - May be used as an undercoat to prepare all new or previously finished interior wood surfaces for solvent based and water based varnish and lacquer topcoats. Can be sanded.

  • Compatible with ALL clear finishes, including solvent based and water based polyurethane varnish, lacquer and shellac
  • Great sealer- Deeply penetrates wood pores in new wood or existing finishes
  • Fast drying- Can be recoated in less than 1 hour
  • Sands easily & quickly - For smooth results
  • Compatible with ALL clear finishes, including solvent based and water based polyurethane varnish, lacquer and shellac

Application

Surfaces must be clean, dry, and sound. Remove any wax from the surface with methylated spirits. Sand bare wood as smoothly as possible and remove all sanding dust. Previously applied wood stains must be completely dry. Previously applied finishes must be clean and tightly adhered. Thinning is not normally necessary. Apply evenly and consistently and allow to dry 45 minutes before sanding with 120 or finer grit sandpaper. Remove all dust and apply finish coat. Note: A second coat of sealer will improve the film build and give added depth to the final finish on porous second coat to dry 1 hour before sanding lightly and applying finish coat.


Brush application: For best results use a natural bristle brush. Apply a full brush load of Sealcoat to the surface using full, even strokes, brushing back into the wet material to maintain a wet edge. Do not over brush or brush back into material once it becomes tacky.

Wiping application: Use a lint free cloth. Pour or brush a liberal quantity of Sealcoat onto the surface and quickly work into the wood with brush, making sure sealer soaks thoroughly into any open or end grain. Wipe away any excess with cloth and stop wiping when surface becomes tacky. For vertical surfaces pour Sealcoat onto cloth and wipe over the wood. If the wood is stained, a second application may be needed to avoid sanding through the sealer and the stain.

Spray application: May be spray applied using conventional, HVLP systems, or airless. Use a .011 to .013 tip and 800 – 1000 psi for airless spray application. Follow equipment manufacturer’s instructions.