When a person is learning about wood stripping, Owatrol is one of the best places to start. Ultimately, the product needed for the job will depend on the wood and the specific stripping job that is being done. With that said, we have taken the time to look at the different Owatrol Wood Strippers below.
There are four products to choose from, each of which has its own specific job. There is no wood stripping job that they cannot perform.
This is the all round wood stripping product. With the ability to strip oils, stains, paint, grade stamps, and mill glaze, Prepdeck works well on new wood and is pretty easy to use. Since the product is liquid it can be used on horizontal surfaces. After using this product it needs to be neutralised with net-trol.
This product is great for vertical products. The formula was designed not to drip or to run. It can remove oils, stains, paints, and other products. Dilunett can remove up to eight coats with just one application. It can be left on the wood for up to 24 hours. This is great for stubborn surfaces. It also needs to be neutralized with net-trol after use.
This wood remover is used to help strip wood with oils. This can also be used to remove the mill glaze from new wood. This needs to be neutralized with net-trol after being used on the wood.
This stripper can be used to remove any type of coating on the wood including 2 pack paints as well as power coatings. It will leave the wood looking clean and fresh. There is no neutralizing that needs to be done after use and the wood can get a new coat in as little as 6 hours. DSP is a gel and can be used on horizontal or vertical wood. It will work in as little as 5 minutes.
In conclusion, these wood strippers are effective at stripping the wood. The product that is used will depend on the wood that needs stripping. Therefore, we hope this guide will help a person find the right wood stripper for their project.
See the Owatrol Range from Promain RIGHT HERE!