Tackling large or small home improvement jobs can be a very time-consuming task. But here at Promain, we like to make your workload easier. We are able to do this with our large variety of surface preparation products. No matter what you are needing to get done, Owatrol has a solution that will fit your needs. We have put together a guide for our three top-selling products.
Owatrol ESP Easy Surface Prep
Easy Surface Prep or ESP for short. ESP is an easy to use product. This makes it easy for you to be able to paint over any shiny or non-porous surface, using oil or water-based paint. You will no longer have to strip and sand the surfaces, this will save you time and energy. The ESP is a colorless and odorless formula. It will not warp the existing base or other previous coatings that have been applied.
You can use this product directly from the bottle. Simply wipe it on with a cloth, brush or even a roller. Once it has been applied, let it rest for 5 minutes before wiping off the excess product. Wait for at least 2 hours, since this will allow it to fully dry. After the ESP has dried you have up to a week to paint on your shiny surface. If you do not get the time to paint it during that time frame, you can always repeat the process.
There is an endless amount of things that you use the ESP on. Here are a few examples:
- Repaint all your kitchen cupboard and drawers without spending a small fortune. Using the ESP will also help eliminate the need to strip and sand them, which will save you time.
- Change up your bathroom tiles, by painting them a new color. This is a cheaper option then re-tiling your bathroom.
- Refurbish all your old furniture. Doing this is will update your whole living room.
The decorating industry’s best kept secret is Floetrol. Floetrol is a paint additive, that is able to improve the flow of paint. It can be added to all water-based paints. Adding this will make the paint flow easily and making any painting job a simple taste. This will result in a smaller number of visible brush marks. Floetrol will improve the quality of the paint finish for every level of painter, even the novices. We know that adding things into the paint can cause some unforeseen complications. But our formula will give you peace of mind and does not affect the overall quality of the paint. It will only make our painting job easier, and the results are worth it.
Using Floetrol is simple. All you have to do is add in the recommended amount. This information can be found on the packaging or on our website. Make sure that everything is well mixed in. Once it is all mixed in, you can paint as you normally would. With its ease of use, this paint additive should become a staple in everyone’s garage. It even makes the most difficult jobs an easy task. For instance, in the past having to paint a ceiling was one of the most dreaded tasks. But using Floertol in your paint will make it an easy painting job. Especially since the roller is able to glide more easily across the ceiling. Sadly, this formula is only able to be used with water-based paints.
Owatrol Emulsa Bond
Owatrol’s Emulsa Bond is a great all in one bonding primer and first coat of paint. This bonding agent can be used on porous or powdery surfaces. It works as a water-based paint additive, that eliminates the need to prime your painting surface. This is will save you a lot of time and energy.
The Emulsa Bond has the ability to act as a stabilizer, that is able to penetrate deep into any surface. This makes it easy for the bond to soak into the surface which means that you no longer need a primer. It also has the ability to help prevent peeling and flaking from happening. Simply mix the Emulsa Bond into your water-based paint of choice. Then apply it to the damp surface that you are wanting to fix. This will adhere to the surface and reduce any type of peeling problems.