Rustoleum Biosan Aqua Hygiene coatings contain BACTRON antibacterial protection, it is the ideal solution for the maintenance of a hygienic environment where cleanliness is of utmost importance.
Rustoleum Biosan Aqua Hygiene is a single pack, water based, acrylic, antibacterial hygiene coating designed for use in areas where controlled hygienic conditions are essential. Rustoleum Biosan Aqua Hygiene coatings contain BACTRON antibacterial protection, supported by good housekeeping practices, is the ideal solution for the maintenance of a hygienic environment where cleanliness is of utmost importance.
Rustoleum Biosan Aqua Hygiene is ideal for use in areas where hygiene factors are of high importance, such as hospitals, operating theatres, wards, dental surgeries, care homes, food processing areas, restaurants, kitchens, dairies, breweries, abattoirs, leisure centres and schools.
The BACTRON contained in Biosan Aqua Hygiene has been proven to kill most types of bacteria and so called 'super bugs' such as E.coli 0157, Listeria sp., Staphylococcus aureus, Salmonella, Shigella sp and MRSA.
Rustoleum Biosan Aqua Hygiene can be applied using brush, roller or airless spray to offer high coverage and fill power with excellent flow and levelling properties. Biosan Aqua Hygiene has fast drying times of just 40 minutes to touch and can be recoated after just 4 hours for a highly decorative, satin/matt finish that can be purchased in a range of 2,500 different colours.
Surface and Environment
Rustoleum Biosan Aqua Hygiene can be applied to all smooth, mineral and pre treated surfaces internally to provide the utmost protection from bacterial infection and is commonly used and recommended by hospitals nationwide.
|Finish:||Gloss, Matt and Satin|
|Stock Colours:||None, Only Tints|
|Tintable:||Yes. Please note, bespoke tints are non refundable / exchangeable.|
|VOC Content:||110.0g per Litre|
|Volume Solids:||35 - 50%|
|Suitable Substrates:||For walls and ceilings where hygiene control is essential|
|Application Method:||Brush, Roller, Air Atomised Spray or Airless Spray|
10 - 12 m2 per litre for Gloss or Satin
7 - 10 m2 per litre for Matt
|Wet Film Thickness (WFT):||90 microns (Gloss/Satin), 125 microns (Matt)|
|Dry Film Thickness (DFT):||30 microns (gloss/Satin), 60 microns (Matt)|
|Touch Dry:||45 minutes at 20°C|
|Overcoatable:||4 hours (Gloss/Matt), 8 hours (Satin) at 20°C|
|Fully Cured:||2 days at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.