£9.95 delivery on orders excluding certain products & postcodes *
Im1 - Im4 Part 9 Immersion Environments
ISO12944 Part 9 is split into 4 subcategories depending on the type of immersion. Im1 is for fresh water environments such as river installations and hydro plants steel protection. Im2 is for sea or brackish water environments, such as structures in harbour areas or offshore steel structures. Examples include sluice gates, locks or jetties. Im3 is for buried steel structures in soil, such as tanks, steel pipes and steel piles. Finally, Im4 is for steel in sea or brackish water with cathodic protection.
Scroll to the bottom of this page for a full list of suppliers and their specifications.
Download the manufacturer specifications for steel systems below:
Hempel | International | Jotun | PPG | Selemix | Sherwin Williams | Sika | Teknos
Guide To Working In Confined Spaces
Shop By
Filter by
-
Jotun Penguard ProA universal, all round, new construction coating. Used as primer, mid coat, finish coat or as single coat system.
-
Hempel Hempadur 15590A two-component epoxy primer coating especially for use on surfaces exposed to severe abrasion.
-
Hempel Hempadur Multi Strength 45703A self-priming pure epoxy paint which cures to a corrosion resistant coating.
-
Jotun Jotamastic 87 AluminiumA 2 pack surface tolerant, long lasting corrosion protection for carbon steel and aged coatings found in severe environments.
-
Jotun Jotamastic 90 Alu B15A two component coating for use in atmospheric and immersed environments.
-
Jotun Penguard Pro GFA two-pack epoxy paint coating that is reinforced with glass flake. Highways Approved Item No.123.
-
Jotun Marathon 550A 2 pack structural steel and piping coating that will continue to cure while immersed.