C3 Environments externally typically consist of urban and industrial atmospheres with moderate sulfer dioxide pollution and coastal areas with low salinity. Internally, typical environments include production rooms with high humidity and some air pollution. Examples include food processing plants, laundries, breweries and diaries.
Scroll to the bottom of this page for a full list of suppliers and their specifications.
Items 1-28 of 41
Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.
A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.
A tough, hard wearing finish coat for application over properly primed surfaces.
A low VOC, high solids, rapid cure primer/finish, offering excellent anti-corrosive protection and long term colour and gloss durability.
A two component, anti-corrosive metallic zinc rich epoxy primer.
A two component acrylic polyurethane finish giving excellent durability and long term recoatability.
A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.
A two pack isocyanate free finish based on an acrylic epoxy binder system. NORSOK M501 Rev 6 System 1.
A high solids, tin free, PU with fast drying and high gloss attributes for use where long term exterior gloss and colour retention is required.
A versatile high performance polyamide cured epoxy designed to fulfil the needs of both new construction and maintenance painting to steel, aluminium ...
Provides a high gloss and very high level of chemical and atmospheric resistance in harsh environments up to C5-M & C5-I High.
7-413 can be applied wet on wet to bare or galvanised steel, phosphate steel, light alloys, stainless or previously coated steel and GRP.
A 2 pack primer offering excellent adhesion and protection properties for steel in the harshest of environments up to C5M-low.
A 2 pack epoxy enamel which offers good gloss and a hard durable film to bare and sand blasted steel.
Provide a very high gloss finish and excellent protection for steel in highly aggressive environments, up to C5M-low rated.
A very high gloss, excellent colour fast and resistance to atmospheric attack product, available in RAL, BS 4800 or NCS Colours.
A two part polyamide cured, high molecular weight epoxy coating, designed as a high build, all purpose coating for new construction.
A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.
A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168
A two component amine cured epoxy coating designed for new construction where short dry to handle and over coating times are required.
A one part oxidatively drying alkyd coating, that is a fast drying, high build, zinc phosphate pigmented primer or mid coat in atmospheric environment...
A two component chemically curing high gloss aliphatic acrylic polyurethane coating that offers resistance to UV degradation and good chemical resista...
A fast drying, two part amine cured epoxy zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel.
A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.
A 2 component high solids rapid drying zinc phosphate epoxy Primer and build coat that has been formulated to cure at low temperatures down to -5°...
A two component, high solids polyamine adduct cured zinc rich epoxy primer for aggressive environments.
Formally PPG SigmaDur 568. A 2 Part High Solids, High Build Polyurethane Gloss Finish.
For steel from PPG Sigma, Ameron. Highways Approved Item No.185.