£7.75 delivery on orders excluding certain products & postcodes *
C3 Environments externally typically consist of urban and industrial atmospheres with moderate sulfer dioxide pollution and coastal areas with low salinity. Internally, typical environments include production rooms with high humidity and some air pollution. Examples include food processing plants, laundries, breweries and diaries.
Scroll to the bottom of this page for a full list of suppliers and their specifications.
Carboline | Hempel | International | Jotun | PPG | Selemix | Sherwin Williams | Sika | Teamac | Teknos
Guide To Working In Confined Spaces
An anti corrosive, metal primer for iron and steel.
Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.
A 2K high build epoxy primer containing anticorrosive pigments.
An epoxy powder coating particularly suitable for storage tanks for the water industry.
A tough, hard wearing finish coat for application over properly primed surfaces.
A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.
Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.
Grey, highly reactive, fast drying and offers excellent adhesion to concrete, steel, aluminium, fibreglass and wood.
A two pack epoxy anti-corrosive primer for application to steel which is clean and free from scale and / or rust.
A 2 pack epoxy enamel which offers good gloss and a hard durable film to bare and sand blasted steel.
A hard wearing, long lasting priming barrier for use in severe corrosive environment systems.
A zinc phosphate 2 pack epoxy paint for use in corrosive environments within a Hempel coatings system.