Sherwin Williams Macropoxy 267 - Formerly Leighs Epigrip C267V3

Part A and B: UN1263 (Class: 3, Pk Grp: III)
A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.
Available in 5 and 18 Litres
From £119.08 £99.23
In stock
Only %1 left
Product Description

Sherwin Williams Macropoxy 267 is a high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.

Best Uses

Sherwin Williams Macropoxy 267 is best suited as an undercoat in conjunction with high performance primers.


Recommended application methods via airless spray, conventional spray, brush or roller.

Recommended thinner Sherwin Williams Thinner No 5, recommended cleanser Sherwin Williams No 9 or No 13. Compatible with a wide range of Macropoxy, Zinc Clad Epoxy primers and buildcoats.

Indefinitely overcoatable with epoxy systems provided the surfaces to be coated have been suitably cleaned. Where a high degree of gloss and colour retention is required overcoat with, Acrolon C137V2, Acrolon C237, Acrolon 1850 and Acrolon 7300 within 7 days at a minimum dft of 50 microns or in the case of Acrolon C750V2 overcoat within 4 days. These overcoating times refer to achievement of optimum adhesion at 23°C and will vary with temperature.

Technical Details


  • HA Item No 112
  • Norsok M-501 System 1 (Pre Qualified)
  • Norsok M-501 System 2B
  • Norsok M-501 System 5B (Pre Qualified)
  • Norsok M-501 System 6A
  • Norsok M-501 System 6B

Technical Info:

  • Dry Film Thickness: 125 microns
  • Theoretical Coverage: 6.24m2 per litre
  • Pot Life: 2 hours at 15°C
  • Available in Grey MIO and Dark Grey MIO
  • Available in 5 and 18 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use