Owatrol Oil

Owatrol Oil

If you are looking forMarine Owatrol Oil then make sure that you look no further than the range that we have available here at Promain.Marine Owatrol oil is a very popular product to use on boats and can provide high gloss and excellent protection on wooden surfaces as well as treatment forrusted surfaces. Owatrol is a very trustedmanufacturer of such products and they work hard to ensure they provide the best products possible, the same way in which we work here at Promain. WithOwatrol Oil you can be sure that you are getting the very best product to ensure a protective and enhancing layer for any wooden surface. 

  • Owatrol Deks Olje D1 Wood Oil
    For all types of interior and exterior wood, including boats, decking, garden furniture etc.
    From £26.73
    (£32.08 Inc VAT)
  • Owatrol Deks Olje D2 High Gloss Wood Finish
    A high gloss wood finish oil for external and internal use on new and old timber.
    From £31.48
    (£37.78 Inc VAT)
  • Owatrol Oil for Rusted Surfaces
    For treating rusted surfaces. Also prevents rust forming and stops corrosion. Usable as a paint additive.
    From £14.64
    (£17.57 Inc VAT)
  • Owatrol Textrol Penetrating Oil Finish
    From £30.00
    (£36.00 Inc VAT)
  • Owatrol Seasonite Protection For New Wood
    From £21.62
    (£25.94 Inc VAT)
  • Owatrol RA85 Aluminium Paint
    A high gloss paint coating offering an aluminium finish which will not flake or peel even at temperatures of 175°C.
    From £28.42
    (£34.10 Inc VAT)
  • Owatrol Net-Trol Wood Cleaner and Colour Restorer
  • Owatrol Marine Oil
    A rust inhibiting primer which is suitable for finishing with both single and 2-pack paints and finishes.
    From £16.37
    (£19.64 Inc VAT)
  • Owatrol Transyl Oil
    A multi-purpose problem solver which releases, penetrates, lubricates, cleans and protects metal joints, tools and machinery.
    From £9.94
    (£11.93 Inc VAT)
  • Owatrol Marine Strip
    From £18.09
    (£21.71 Inc VAT)
  • Owatrol CIP Corrosive Inhibiting Primer
    An anti-corrosive primer that penetrates metal and stops rust to steel structures, motor vehicles, civil engineering and marine equipment.
    From £28.49
    (£34.19 Inc VAT)

11 Items

Owatrol oil is not only for use on wooden surfaces but there are also Owatrol oil products that can be used to treat rusted surfaces as preventing rust forming and also stops corrosion, plastic treatment to restore plastic to it’s former glory when it has been discoloured by conditions such as sunlight, rain and pollution. There is an Owatrol oil product that can be used to protect wood from the attack of insect and fungal attacks.

Here at Promain we supply our customers with Owatrol products because we know that they are a trustworthy and reliable manufacturer that provide high quality products time after time and have proved that they constantly provide good quality products to their customers so therefore we make sure that our customers have access to the excellent products created by Owatrol.

If you have any questions about any of the Marine Owatrol Oil products that we have available then please don’t hesitate to get in touch with us as one of the Promain team will be more than happy to help and provide you with any advice you may need. Don’t forget that here at Promain we only ever sell products that we would be happy using ourselves and the same goes for all Owatrol Oil products.

Owatrol Oil: The Trusted Solution for Marine and Metal Protection

Reliable Protection for Heavily Rusted Surfaces and Harsh Conditions

Owatrol Oil is a proven rust inhibitor and oil-based paint additive that gives long-lasting protection to wood and metal surfaces. It penetrates deeply, driving out excess moisture and air, and helps stabilise exposed rust on metal parts. Whether you’re treating a boat, repairing outdoor furniture, or restoring heavily rusted surfaces, it holds firm even in tough weather.

Use it directly on rusted metal or sound metal, even where rust is firm but not flaking. It helps prevent peeling, improves paint adhesion and acts as a base before applying primers or finishing coats. Owatrol Oil provides enhanced adhesion, making it particularly beneficial for creating a strong foundation for primers and finishing coats. On wood surfaces, it works as a wood stain additive that improves durability and appearance without damaging thinners.

Not Just for Boats

Though widely used in marine environments, Owatrol Oil is versatile enough for other areas where rust, peeling paint, or wood damage is a problem:

  • Home Repairs: Use on dry or previously coated surfaces like flooring, skirting boards, and frames to improve uniformity and protect against moisture.

  • Car Maintenance: Perfect for unpainted rusty steel and chassis restoration. It can be applied using a brush, HVLP sprayer or even a garden sprayer.

  • Outdoor Use: Apply to metal gates or sheds with surface contaminants or lightly rusted surfaces to reform and protect. It also helps lift well bonded paint without affecting areas that don't need it.

Improves Paint Flow, Adhesion, and Flow of Paint

When mixed with oil-based paints, Owatrol Oil acts as a paint conditioner that improves paint flow and extends wet edge time. This improved paint flow contributes to better workability and viscosity. It reduces brush marks and roller marks while helping paint level out better—ideal for use on previously painted or rusted surfaces. Owatrol Oil ensures better adhesion of finishes to various surfaces. It eliminates brush marks and stops paint from drying too fast in hot solvents or heat-resistant areas.

Used as an additive, it reforming improves paint adhesion on hard-to-stick-to areas like old gloss, metal surfaces or alkyd-based coatings. It’s especially helpful when switching between different types of finishes, such as chlorinated rubber or oil-based primers.

Available in Handy Sizes

Whether you’re doing minor repairs or large projects, Promain offers Owatrol Oil in the right pack size:

  • 500ml – Best for light jobs or small touch-ups.

  • 1L – Good for general tasks around home or workshop.

  • 5L – Cost-effective choice for regular use or large surface areas.

Why Use Owatrol Oil?

  • Penetrating Rust Inhibitor: Soaks into rusted surfaces and wood, protecting from the inside out. Owatrol Oil provides a flexible finish that drives out moisture and air, effectively preventing rust and damage.

  • Moisture Blocker: Drives out moisture and air, helping avoid flaking, blistering or rust spread. Owatrol Oil enhances the inherent quality of oil or alkyd-based coatings without compromising their appearance or drying times.

  • Protects Metal Parts: Prevents further corrosion and helps increase heat resistance where needed.

  • Increased Wet Edge Time: Helps when painting larger areas or in hot conditions, improving finish and control.

  • Won’t Damage Well Bonded Paint: Doesn’t affect areas that are already stable, so it’s safe to use across previously coated surfaces.

Penetrating Rust Inhibitor

As a penetrating rust inhibitor, Owatrol Oil excels at deeply penetrating metal surfaces to reach the sound metal beneath, effectively halting rust in its tracks. It’s particularly effective on lightly rusted surfaces, previously coated surfaces, and unpainted rusty steel. By reforming the surface, Owatrol Oil significantly improves paint adhesion, making it an ideal oil-based paint additive for metal surfaces. It also eliminates brush marks and roller marks, ensuring a smooth, professional finish. Whether you’re using a brush, roller, airless sprayer, HVLP sprayer, or garden sprayer, Owatrol Oil provides excellent results.

Wood Protection

Owatrol Oil offers exceptional wood protection by deeply penetrating wood surfaces to prevent moisture damage. As an effective wood stain additive, it helps to prevent peeling and improves uniformity, giving your wood surfaces a consistent, high-quality finish. By driving out excess moisture and air, Owatrol Oil also protects metal parts, such as hinges and latches, from corrosion. It’s suitable for a variety of wood surfaces, including window frames, and can be used in conjunction with other products, such as chlorinated rubber, to provide a durable and long-lasting finish.

How to Apply

Prep the Area: Remove loose rust, surface contaminants and paint loosened by water or damage. Owatrol Oil can be applied directly to rusted surfaces unlike damaging thinners, which can compromise the paint's appearance or drying times.

Apply Thinly: Use a brush, roller or sprayer. Let it dry fully before applying oil-based paints or finishing coats.

Maintain Regularly: Re-check treated metal parts and wood every season for signs of wear or water-based paints breaking down.

Application on Rusted Surfaces

When applying Owatrol Oil to rusted surfaces, it’s crucial to ensure that the surface is free from contaminants. Owatrol Oil can be applied directly to firm rust, and its unique formula allows it to penetrate deeply, eliminating the need for hot solvents or damaging thinners. It improves the flow of paint, increases the wet edge time, and provides greater adhesion, making it an ideal paint conditioner for metal surfaces. Owatrol Oil is suitable for use on exposed rust, rusted surfaces, and previously coated surfaces, and performs well even in cold environments, making it a versatile solution for various applications.

 

Owatrol Products from Promain

Promain is the trusted supplier of Owatrol products in the UK. Here’s a quick guide to what else you might need:

Industries that Use Owatrol Oil

Owatrol Oil is widely used across various industries, including construction, automotive, and manufacturing, due to its versatility and effectiveness as a rust inhibitor, paint conditioner, and wood protector. Its ability to improve paint flow, eliminate brush marks, and provide greater adhesion makes it an ideal solution for companies looking to enhance the performance of their oil-based paints and alkyd-based coatings. Additionally, Owatrol Oil’s heat resistance and ability to protect metal parts from corrosion make it a popular choice for use in extreme environments. With its ease of application and suitability for use with a variety of tools, Owatrol Oil is a valuable asset for any industry looking to improve the durability and longevity of their products.

Frequently Asked Questions:

What is Owatrol Oil used for?

It’s used to treat rusted metal, improve oil based paint performance, and protect wood by penetrating and blocking moisture and air.

Can you paint over Owatrol Oil?

Yes. Once dry, you can overcoat Owatrol Oil with most oil-based paints or finishing coats.

How long does it take to dry?

Usually around 24 hours, depending on temperature and ventilation. Make sure the surface is dry before painting.

How many coats do I need?

Apply two or three thin coats for full coverage. Let each one dry before adding another.

Want proper rust and wood protection?

Choose the right Owatrol product and order directly from Promain. Got questions about application or coverage? Our team’s ready to help.