£9.95 delivery on orders excluding certain products & postcodes *
C2 Environments externally typically are mostly rural areas with atmospheres with a low level of pollution. Internally, C2 environments are unheated buildings where condensation may occur. Examples include depots, warehouses and sports halls.
Scroll to the bottom of this page for a full list of suppliers and their specifications.
Carboline | Hempel | International | Jotun | PPG | Selemix | Sherwin Williams | Sika | Teamac | Teknos
Guide To Working In Confined Spaces
A water-borne, one-component fast drying alkyd modified acrylic paint with special anti-corrosive pigments.
An epoxy powder coating particularly suitable for storage tanks for the water industry.
Formally PPG SigmaDur 568. A 2 Part High Solids, High Build Polyurethane Gloss Finish.
An easy to use quick drying gloss finish for overcoating of primed steel substrates.
A quick drying alkyd anti corrosive primer pigmented with zinc phosphate for the protection of steel.
A high performance, modified alkyd metal primer used as an anti-corrosive primer on iron and steel.
A zinc phosphate 2 pack epoxy paint for use in corrosive environments within a Hempel coatings system.
A hard wearing, long lasting priming barrier for use in severe corrosive environment systems.
A 2 pack, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.
A 1 pack alkyd high gloss finish. A easily maintained cosmetic finish coat on areas above the waterline.
A 2 pack chemically curing high gloss aliphatic acrylic polyurethane coating. Provides resistance to UV and chemicals.
A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168
A fast drying, 2 part amine cured epoxy zinc phosphate pigmented coating. For exposed structural steel.
A two part polyamide cured, high molecular weight epoxy coating, designed as a high build, all purpose coating for new construction.
A 2 pack amine cured epoxy coating for new construction where short dry to handle and over coating times are required.
A universal, all round, new construction coating. Used as primer, mid coat, finish coat or as single coat system.
A single component oxidatively drying alkyd coating for engines, topside, deck and superstructure.
A 1 part alkyd that is fast drying, high build, zinc phosphate pigmented primer / mid coat for atmospheric environments.
A quick drying 1 pack acrylic resin based topcoat for use as a finishing coat for application to steel or concrete.
A 2 pack high solids rapid drying zinc phosphate epoxy primer and build coat. Cures at low temperatures down to -5°C.
A 2 pack primer offering excellent adhesion and protection for steel in the harshest of environments up to C5M-low.
A 2 pack epoxy enamel which offers good gloss and a hard durable film to bare and sand blasted steel.
Apply wet on wet to bare or galvanised steel, phosphate steel, light alloys, stainless or previously coated steel and GRP.
Provides high gloss with high level of chemical and atmospheric resistance in harsh environments up to C5-M & C5-I High.
A solvent based 2 pack PU applied without a primer to glass splash backs, plant, agricultural equipment, plastics etc.
A two pack isocyanate free finish based on an acrylic epoxy binder system. NORSOK M501 Rev 6 System 1.
Fast-drying, high-gloss PU for long-term exterior gloss and colour retention.