Hempel Hempathane Fast Dry 55750
Hempel Hempathane Fast Dry 55750 is a two component polyurethane paint, containing zinc phosphate. With good gloss retention and colour stability.
Best Uses
Hempathane Fast Dry 55750 is recommended for use as a high build one coat system for protecting steel structures, that are in a moderately corrosive environment. It may also be used as an undercoated intermediate coat or topcoat within the system.
Application
Application is by Airless Spray or Brush. Any oil, grease and other contaminants should be cleaned with a suitable detergent, and salts, detergents and other contaminants should be removed with a high pressure fresh water clean, prior to applying Fast Dry 55750.
Apply on a clean and dry surface with a temperature that is at least 3°C above the dew point, to avoid condensation.
IMPORTANT NOTICE: From 24th August 2023, adequate training is required before industrial or professional use of this product. Training can be accessed at: https://www.safeusediisocyanates.eu
Certificates and Approvals
- Complies with the European Fire Standard EN 13501-1, fire reaction class: B-s1, d0.
Technical Info
| Components: | Two Component |
| Type: | Polyurethane |
| Finish: | Semi Gloss |
| Stock Colours: | Light grey 11150 |
| Tintable: | Yes. Please note, bespoke tints are non refundable / exchangeable |
| VOC Content: | 326 g/L |
| Volume Solids: | 65 ± 2% |
| Suitable Substrates: | Steel |
| Application Method: | Brush, Airless Spray |
| Theoretical Coverage: | 326 g/L |
| Wet Film Thickness (WFT): | 150µm |
| Dry Film Thickness (DFT): | 100µm |
| Induction Time: | - |
| Pot Life: | 2 hours at 20°C |
| Touch Dry: | 60 minutes at 20°C |
| Hard Dry: | 120 minutes at 20°C |
| Overcoating: | Minimum of 4 hours at 20°C |
| Cleaner / Thinner: | Thinner 08080 |
| Shelf Life: | Base: 3 years, Curing agent: 2 years - both unopened |
| Packaging: | Available in 5 and 20 Litres |
