Selemix 7-510 2 pack polyurethane topcoat is formulated with enamel and will provide a high opacity, high gloss finish which has excellent resistant and durable making it perfect for protecting ferrous steel.
Please note, the Hardener is not included with this product. Compatible Hardeners are Selemix Direct 9-060 Extra PU Hardener.
Selemix 7-510 Polyurethane Topcoat will offer excellent level of opacity and high gloss finish. The product has been formulated with enamel making it highly resistant and durable coating ideal for highly aggressive environments. Selemix 7-510 is available in a large range of colours and can be tinted to most RAL, BS and NCS colour codes.
When used to topcoat an applicable primer as part of a Selemix paint system it is perfect for protecting steel, galvanised steel, black steel, previously coated steel, light alloys, stainless steel, agricultural equipment, tractors, trailers, harvester, cars, truck, motorcycles, steel structures, plant equipment, excavators, diggers, dumpers, earth movers, glass fibre reinforced polyester GRP, previously coated steel, garden furniture plus many more.
Selemix 7-510 will provide a high level of protection for plant equipment, excavators, diggers, dumpers, screed pumps, galvanised steel, stainless steel, steel, black steel, phosphate steel, previously coated steel, agricultural equipment, tractors, trailers, harvesters, ploughs, light industrial equipment, workshop equipment, machine tools, lathes, milling machines, drill presses, grinders, welfare cabins, airport ground support equipment, control panels, electrical cabinets, cars trucks, metal shelving, garage doors, roller shutter doors, steel doors plus many more.
Selemix 7-510 Polyurethane Topcoat can be applied by both conventional and airless spray equipment. When applied at a 50 micron dry film thickness Selemix 7-510 has theoretical coverage rate of 6.4-7.2 m2 per litre.
For best results it is recommended that 2 coats are applied over a compatible primer coat. Selemix 7-510 is a 2 pack paint that will need to be combined with Selemix Hardener 9-060 at a general ratio of 4 to 1 in order to cure.
Selemix 7-510 will also need to be thinned with one of the below prior to use:
Selemix 7-510 is a 2 pack paint that will need to be combined 4 to 1 with one of the below in order to cure:
- A 2 pack Polyurethane Enamel Topcoat Paint
- Spray applied
- High gloss finish
- High opacity
- High resistance to aggressive environments
- High durability
- Available in most RAL, BS & NCS colour codes
- Recoatable without sanding after minimum of 14 hours, maximum of 24 hours at 20 degrees Celsius
- Touch dry 4-6 hours at 20 degrees Celsius
- Fully cured 10-14 hours at 20 degrees Celsius
- Compatible primers Selemix 7-413 & 7-414
- Theoretical coverage of 6.4-7.2 m2 per litre when applied at 50 micron dry film thickness
- Available in 5 and 20 litres.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.