2 pack epoxy paints are extremely tough and durable coatings that can be used for large variety of applications and applied to substrates such as steel and concrete.
Below, you will find a comprehensive selection of the very best 2 pack epoxy paints available on the market, with a range of coatings suitable for providing protection against humidity and moisture, as well as rust, strong chemicals, acids, alkalis and solvents. Products can be applied using brush, roller or spray, with a wide range of epoxy paint colours to choose from.
Items 1-28 of 65
A high performance epoxy system for application at temperatures down to 0°C.
A superior surface tolerant epoxy mastic for less severe exposures or when shorter maintenance intervals are expected in tougher environments.
A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.
Low Solvent 2 Pack Epoxy Industrial Floor Paint, highly resistant to strong chemicals and water submersion on materials including concrete and metal.
A two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability.
A 2 part surface tolerant high solid glass flake epoxy coating primarily designed for use in offshore splash zone maintenance.
A fast drying product, based on solvent-based epoxy resins that contains rust inhibitive pigments to protect all metal surfaces.
B95 High-Build Flexible Epoxy, outstanding corrosion protection in coastal and industrial areas.
A fast curing, two component, high solids, high build zinc phosphate polyurethane primer / finish for in shop application to steel.
A 2 component high solids rapid drying zinc phosphate epoxy Primer and build coat that has been formulated to cure at low temperatures down to -5°C.
Transgard TG121/Epigrip K267 two pack epoxy high solids Micaceous Iron Oxide (MIO) Highway Agency Item No.121.
A high build, 2 pack epoxy, zinc phosphate primer / buildcoat for the anti corrosive protection of carbon steel surfaces.
A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.
A high performance, fast drying, acrylic urethane gloss finish for use where long term exterior gloss and colour retention characteristics are required.
A high performance 2 pack single coat shop applied protective finish for structural steel that will not normally require further site coats.
A high performance fast drying acrylic urethane semi-gloss finish for use where long term exterior colour retention is required. Highways Agency Item No. 169.
A high spec, 2 pack, anti corrosion intermediate MIO coat for steel structures at risk from severe abrasion.
A high solids, 2 pack epoxy comprising of lead free colouring pigments, micronised glass flake and anti corrosive pigments.
This product is now discontinued.
An 2 pack epoxy zinc rich anti corrosive primer for the protection of steel surfaces.
A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected steel.
A 2 pack epoxy undercoat, pigmented with MIO (micaceous iron oxide). Network Rail Item No. 7.2.2 and 7.1.7.
A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.
A versatile high performance polyamide cured epoxy designed to fulfil the needs of both new construction and maintenance painting to steel, aluminium or galvanised steel.
A low temperature curing, surface and humidity tolerant two pack modified epoxy for use as an anti corrosive coating for long life steel protection.
A 2 pack, fast drying, high solids, low temperatures epoxy coating for concrete and steel. LUL Cert 1329.
Formerly PPG SigmaCover 640/Amerlock 400C. A self-priming coating for steel and concrete. LuL APR No.1255
Advanced coating offers quicker drying and reduced risk when curing at sub-zero temperatures.
Items 1-28 of 65
Due to their resistance to chemicals and solvents, coupled with excellent durability and abrasion resistance, 2 pack epoxies are ideal for providing floor coatings in demanding industrial environments, such as workshops, warehouses, factories and even nuclear decontamination facilities.
When combined with anticorrosive additives, 2 pack epoxy paints can be used to provide protection to steel in aggressive atmospheric environments, such as industrial and marine environments up to C5M-High rated as part of ISO 12944-6 tested systems.
Other specialist applications of 2 pack epoxy paints include WRAS approved tank linings, agricultural/automotive refinishing, the coating of submerged substrates (such as boat hulls, piers, off-shore structures), highways agency approved paint systems, plus many more.
Promain stock a vast range of 2 pack epoxy paints for many specialist applications from leading manufacturers PPG, Rustoleum, Selemix, Jotun, Coo-Var and Hempel.
If you need advice on the correct 2 pack epoxy paint product for your project, please contact our manufacture trained technical team who will be able to specify the best coating based on your requirements.